Xbox 360 Network Registration View The Full Article To set up your Xbox to work on the campus network, please follow the instructions below. Go to: http://netreg.clemson.edu/. Select Add Registration. Here you will be asked for the hardware also called MAC address of your device. To find this, navigate through the following menus: Go to My Xbox, and then select System Settings. Select Network Settings Select Configure Network On the Additional Settings tab, select Advanced Settings At the bottom of this screen youand39ll see a heading called Wired MAC Address, which is your MAC address. Enter the hardware address and description of device, the preferred description would be userid xbox. Click Accept at the bottom of the page. Confirm that device was added successfully by going to My Registrations and make sure it appears in the list there. Your Xbox should nowbe able to access the Internet on a wired campus connection.