Outlook Anywhere 2007 Quick Settings –For on and off Campus View The Full Article Outlook Anywhere 2007 Quick Settings andndashFor on and off Campus. Step1: Make sure Outlook is closed. Step2:Go Start Settings Control panel 2a: If it has not been done, you will need to switch to classic view. Step3: Doubleclick on the andldquoMailandrdquo Icon Step4: Click the andldquoShow Profilesandrdquo button. Step5: Add a new profile, Click the andldquoAddandrdquo button Step6: Name your new Exchange Profile andldquoClemson Exchangeandrdquo Step7: Check the box for Manually Configure, and click Next. Step8: Select the Microsoft Exchange Option, and Click Next. Step9: Use this info for the corresponding boxes Microsoft Exchange server: Exch07.campus.cu.clemson.edu User Name: Your UserID ex:okeefe DO NOT CLICK CHECK NAME Click the andldquoMore Settingsandrdquo button. Step10: If you are doing this setup, and are off Campus you will see the following error message. It is normal After clicking OK on this box, you may need to wait up to 1 Minute before the next box will open. This depends on your computers speed and your internet connection Step11: Click CANCEL on this box. Step12: In the Outlook anywhere subsection, Click the button for Connect to Microsoft Exchange using HTTP. And then click the andldquoExchange Proxy Settingsandhellipandrdquo Button. Step13: Use this info for the corresponding boxes Connect URL https:// box xmail.clemson.edu Connect using SSL Only Checked Only connect to Proxy Serversandhellip..Checked msstd:xmail.clemson.edu On Fast networks, connectandhellip. Checked On slow networks, connectandhellip Checked Proxy authentication settings Use andldquoBasic Authenticationandrdquo Click OK. Step14: Start Outlook, It will prompt you for a User Name and Password. Enter your User Name and password in this format: Example User Name is andldquookeefeandrdquo Campusokeefe Click OK. Basic Troubleshooting. Step1: To Check your connection, hold down the Control Key on your keyboard while rightclicking the Outlook Icon on your taskbar. next to your clock Connect URL https:// box xmail.clemson.edu Connect using SSL Only Checked Only connect to Proxy Serversandhellip..Checked msstd:xmail.clemson.edu On Fast networks, connectandhellip. Checked On slow networks, connectandhellip Checked Proxy authentication settings Use andldquoBasic Authenticationandrdquo Click OK. Step2: You should see something very similar to this. The andldquoConnandrdquo column should read HTTPS. The Status column should read Established.