Holloway, D.S., Walters, D.K., and Leylek, J.H., “A Practical Perturbation-Based Unsteady CFD Methodology,” International Symposium on Airbreathing Engines (ISABE) Paper No.2003-1214, Presented at the Sixteenth ISABE, Cleveland, OH, August 31 – September 5, 2003, (2003).
York, W.D.and Leylek, J.H., “Three-Dimensional Conjugate Heat Transfer Simulation of an Internally-Cooled Gas Turbine Vane,” ASME Paper No.GT2003-38551, Presented at the ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003 (2003).
Walters, D.K.and Leylek, J.H., “Computational Study of Film-Cooling Effectiveness on a Low-Speed Airfoil Cascade – Part I: Methodology and Validation,” ASME Paper No.DETC2002/CIE-34421, Presented at the 2002 ASME Computers and Information Engineering Conference, Montreal, Canada, Sept.29 – Oct.2, 2002 (2002).
Walters, D.K.and Leylek, J.H., “Computational Study of Film-Cooling Effectiveness on a Low-Speed Airfoil Cascade – Part II: Discussion of Physics,” ASME Paper No.DETC2002/CIE-34422, Presented at the 2002 ASME Computers and Information Engineering Conference, Montreal, Canada, Sept.29 – Oct.2, 2002 (2002).
Buck, F.A., Walters, D.K., Ferguson, J.D., McGrath, E.L., and Leylek, J.H., “Film Cooling on a Modern HP Turbine Blade – Part I: Experimental & Computational Methodology and Validation,” ASME Paper No.GT-2002-30470, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
Walters, D.K., Leylek, J.H., and Buck, F.A., “Film Cooling on a Modern HP Turbine Blade – Part II: Compound-Angle Round Holes,” ASME Paper No.GT-2002-30613, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
Ferguson, J.D., Leylek, J.H., and Buck, F.A., “Film Cooling on a Modern HP Turbine Blade – Part III: Axial Shaped Holes,” ASME Paper No.GT-2002-30522, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
Holloway, D.S., Leylek, J.H., and Buck, F.A., 2002, “Pressure-Side Bleed Film Cooling – Part I: Steady Framework for Experimental and Computational Results,” ASME Paper No.GT-2002-30471, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002.
Holloway, D.S., Leylek, J.H., and Buck, F.A., “Pressure-Side Bleed Film Cooling – Part II: Unsteady Framework for Experimental and Computational Results,” ASME Paper No.GT-2002-30472, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
York, W.D.and Leylek, J.H., “Leading-Edge Film-Cooling Physics – Part I: Adiabatic Effectiveness,” ASME Paper No.2002-GT-30166, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
York, W.D.and Leylek, J.H., “Leading-Edge Film-Cooling Physics – Part II: Heat Transfer Coefficient,” ASME Paper No.2002-GT-30167, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
McGrath, E.L., Leylek, J.H., and Buck, F.A., “Film Cooling on a Modern HP Turbine Blade – Part IV: Compound-Angle Shaped Holes,” ASME Paper No. GT-2002-30521, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002 (2002).
York, W.D.and Leylek, J.H., “Numerical Prediction of Pressure Gradient Effects in Film Cooling,” ASME Paper No.99-GT-166, Presented at the ASME/IGTI Turbo Expo '99, Indianapolis, IN, June 7-10, 1999 (1999).
Ferguson, J.D., Walters, D.K., and Leylek, J.H., “Performance of Turbulence Models and Near-Wall Treatments in Discrete Jet Film Cooling Simulations,” ASME Paper No.98-GT-438, Presented at the ASME/IGTI Turbo Expo ’98, Stockholm, Sweden, June 2-5, 1998 (1998).
Hyams, D.G., McGovern, K.T., and Leylek, J.H., “Effects of Geometry on Slot-Jet Film-Cooling,” Presented at the ASME/IGTI Turbo Expo '96, Birmingham, UK, June 10-13, 1996 (1996).
Butkiewicz, J.J., Walters, D.K., McGovern, K.T., and Leylek, J.H., “A Systematic Computational Methodology Applied to a Jet-In-Crossflow - Part 1: Structured Grid Approach,” ASME Paper No.95-WA/HT-52, Presented at the ASME 1995 International Mechanical Engineering Congress and Exposition (IMECE), San Francisco, November 12-17, 1995 (1995).
Walters, D.K., McGovern, K.T., Butkiewicz, J.J., and Leylek, J.H., “A Systematic Computational Methodology Applied to a Jet-In-Crossflow - Part 2: Unstructured/Adaptive Grid Approach," ASME Paper No.95-WA/HT-2, Presented at the ASME 1995 International Mechanical Engineering Congress and Exposition (IMECE), San Francisco, November 12-17, 1995 (1995).
Dunn, W.E., Leylek, J.H., and Chittenden, R.M., “A Laboratory Study of Buoyant Jets in Crossflow,” Presented at the International Association of Hydraulic Research Cooling Tower Workshop, Budapest, Hungary, October 1982 (1982).
Conference Proceedings (Unreviewed)
Leylek, J.H., and Dunn, W.E., “Study of Vertical Buoyant Jets Discharged into a Horizontal Crossflow,” Proceedings of Fluid Mechanics Conference to Honor Professor Helmut Korst, University of Illinois at Urbana Champaign (1984).