Mistreanu, A., Ma, Y., Marshall, J., Leylek J.H., 2006, “A Robust CFD Methodology for Physically Realistic and Economically Feasible Results in Racing – Part I: Development and Validation,” SAE Paper, 2006-01-1440 (2006).
Marshall, J., Ma, Y., Mistreanu, A., Leylek J.H., 2006, “A Robust CFD Methodology for Physically Realistic and Economically Feasible Results in Racing – Part II: Intake Cowl,” SAE Paper, 2006-01-1441 (2006).
Mistreanu, A., Ma, Y., Marshall, J., Leylek J.H., 2006, “A Robust CFD Methodology for Physically Realistic and Economically Feasible Results in Racing – Part III: V8 Manifold Flow in Open/Restricted Engines,” SAE Paper, 2006-01-1442 (2006).
Mistreanu, A., Ma, Y., Marshall, J., Leylek J.H., 2006, “A Robust CFD Methodology for Physically Realistic and Economically Feasible Results in Racing – Part IV: Intake-Valve Region Flow,” SAE Paper, 2001-01-1591 (2006).
Ma, Y., Mistreanu, A., Marshall, J., Leylek J.H., 2006, “A Robust CFD Methodology for Physically Realistic and Economically Feasible Results in Racing – Part V: Exhaust-Valve Region Flow,” SAE Paper, 2006-01-1592 (2006).
Feldman, G.M., Strasser, W.S., Wilkins, F.C., and Leylek, J.H., “Transonic Turbine Blade Tip Clearance with Scalloped Shroud: Part I – Aerodynamic Losses in a Dual-Passage Cascade,” ASME Paper No.GT-2004-54191, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
Strasser, W.S., Feldman, G.M., Wilkins, F.C., and Leylek, J.H., “Transonic Turbine Blade Tip Clearance with Scalloped Shroud: Part II – Losses with and without Scrubbing Effects in Engine Configuration,” ASME Paper No.GT-2004-54192, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
Wilkins, F.C., Feldman, G.M., Strasser, W.S., and Leylek, J.H., “Transonic Turbine Blade Tip Clearance with Scalloped Shroud: Part III – Heat Transfer in Both Cascade and Engine Configurations,” ASME Paper No.GT-2004-54189, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
Holloway, D.S., Walters, D.K., and Leylek, J.H., “Computational Study of Jet-in-Crossflow and Film-Cooling Using a New Unsteady-Based Turbulence Model,” ASME Paper No.GT-2004-54164, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
York, W.D.and Leylek, J.H., “Prediction of Heat Transfer in a Ribbed Channel with Three Different Turbulence Models,” ASME Paper No.GT-2004-54068, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
York, W.D.and Leylek, J.H., “Performance Predictions for a Low-Aerodynamic Loss Turbine Vane Film-Cooling Design with High Effectiveness,” ASME Paper No.GT-2004-53988, Submitted for review for the ASME Turbo Expo ’04, Vienna, Austria, June 14-17, 2004, and for publication in ASME Journal of Turbomachinery (2004).
Holloway, D.S., Leylek, J.H., and Buck, F.A., “A Combined Experimental and Computational Investigation of Engine-Realistic Pressure-Side Bleed Film Cooling,” Accepted for Publication in the International Journal of Rotating Machinery (2003).
Walters, D.K.and Leylek, J.H., “Prediction of Boundary-Layer Transition Effects on Turbine Airfoil Profile Losses,” ASME Paper No.IMECE2003-41420, Presented at the ASME IMECE 2003, Washington, D.C., November 15-21, 2003, In review for the ASME Journal of Turbomachinery (2003).
McDowell, P.A., York, W.D., Walters, D.K.and Leylek, J.H., “Effects of 3-D Local Unsteadiness on Heat Transfer Prediction in Turbulated Passages,” ASME Paper No.IMECE2003-42268, Presented at the ASME IMECE 2003, Washington, D.C., November 15-21, 2003, In review for the ASME Journal of Turbomachinery (2003).
York, W.D., Walters, D.K.and Leylek, J.H., “A Novel Transition-Sensitive Conjugate Methodology Applied to Turbine Vane Heat Transfer,” ASME Paper No.IMECE2003-41555, Presented at the ASME IMECE 2003, Washington, D.C., November 15-21, 2003, Accepted for publication in the ASME Journal of Turbomachinery (2003).
Holloway, D.S., Walters, D.K., and Leylek, J.H., “Unsteady Prediction of 2-D Cylinder-in-Crossflow for Subcritical to Supercritical Regimes,” In review for publication in the International Journal for Numerical Methods in Fluids (2003).
Walters, D.K.and Leylek, J.H., “A CFD Study of Wake-Induced Transition on a Compressor-Like Flat Plate,” ASME Paper No.GT2003-38680, Presented at the ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003, In review for the ASME Journal of Turbomachinery (2003).
Walters, D.K.and Leylek, J.H., “Simulation of Transitional Boundary-Layer Development on a Highly-Loaded Turbine Cascade with Advanced RANS Modeling,” ASME Paper No.GT2003-38664, Presented at the ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003, In review for the ASME Journal of Turbomachinery (2003).
Walters, D.K.and Leylek, J.H., “Navier-Stokes Prediction of Boundary-Layer Transition on a Turbine Stator Vane without Intermittency Functions,” Submitted for publication in the Journal of Power and Energy (2003).
Walters, D.K.and Leylek, J.H., “A New Model for Boundary-Layer Transition Using Single-Point RANS Approach,” ASME Paper No.IMECE2002-HT-32740, Presented at the ASME/IMECE 2002, New Orleans, Louisiana, Nov.17–22, 2002, Awaiting publication (final editing completed) in the ASME Journal of Turbomachinery (2003).
Mistreanu, A.M., Ma, Y., Marshall, J.L., and Leylek, J.H., “A Robust Methodology for Physically Realistic and Economically Feasible Results in Racing – Part I: Development and Validation,” Awaiting Submission for the Biennial SAE Motorsports Conference & Exhibition, Fall 2004, Indianapolis, IN, and Publication in the SAE Journal of Engines (2004).
Mistreanu, A.M.and Leylek, J.H., 2002, “A Robust Methodology for Physically Realistic and Economically Feasible Results in Racing – Part II: Intake-Valve Region Flow,” Awaiting Submission for the Biennial SAE Motorsports Conference & Exhibition, Fall 2004, Indianapolis, IN, and Publication in the SAE Journal of Engines (2004).
Ma, Y.and Leylek, J.H., “A Robust Methodology for Physically Realistic and Economically Feasible Results in Racing – Part III: Exhaust-Valve Region Flow,” Awaiting Submission for the Biennial SAE Motorsports Conference & Exhibition, Fall 2004, Indianapolis, IN, and Publication in the SAE Journal of Engines (2004).
Mistreanu, A.M.and Leylek, J.H., “A Robust Methodology for Physically Realistic and Economically Feasible Results in Racing – Part IV: V8 Manifold Flow in Open and Restricted Engines,” Awaiting Submission for the Biennial SAE Motorsports Conference & Exhibition, Fall 2004, Indianapolis, IN, and Publication in the SAE Journal of Engines (2004).
Marshall, J.L.and Leylek, J.H., “A Robust Methodology for Physically Realistic and Economically Feasible Results in Racing – Part V: Intake Cowl Optimization,” Awaiting Submission for the Biennial SAE Motorsports Conference & Exhibition, Fall 2004, Indianapolis, IN, and Publication in the Journal of Engines (2004).
York, W.D.and Leylek, J.H., “Leading-Edge Film-Cooling Physics – Part III: Diffused Hole Effectiveness,” ASME Paper No.2002-GT-30520, Presented at the ASME/IGTI Turbo Expo 2002, Amsterdam, Holland, June 3-6, 2002, ASME Journal of Turbomachinery, 125 (2), 252-259 (2003).
Walters, D.K.and Leylek, J.H., “Impact of Film-Cooling Jets on Turbine Aerodynamic Losses,” ASME Paper No.99-GT-421, Presented at the ASME/IGTI Turbo Expo '99, Indianapolis, Indiana, June 7-10, 1999, ASME Journal of Turbomachinery, 122, 537-545 (2000).
Walters, D.K.and Leylek, J.H., “A Detailed Analysis of Film-Cooling Physics - Part I: Streamwise Injection with Cylindrical Holes,” ASME Paper No.97-GT-269, Presented at the ASME/IGTI Turbo Expo ’97, Orlando, FL, June 2-5, 1997, ASME Journal of Turbomachinery, 122, 102-112 (2000).
McGovern, K.T.and Leylek, J.H., “A Detailed Analysis of Film-Cooling Physics - Part II: Compound-Angle Injection with Cylindrical Holes,” ASME Paper No.97-GT-270, Presented at the ASME/IGTI Turbo Expo '97, Orlando, FL, June 2-5, 1997, ASME Journal of Turbomachinery, 122, 113-121 (2000).
Hyams, H.and Leylek, J.H., “A Detailed Analysis of Film-Cooling Physics - Part III: Streamwise Injection with Shaped Holes,” ASME Paper No.97-GT-271, Presented at the ASME/IGTI Turbo Expo '97, Orlando, FL, June 2-5, 1997, ASME Journal of Turbomachinery, 122, 122-132 (2000).
Brittingham, A.R.and Leylek, J.H., “A Detailed Analysis of Film-Cooling Physics - Part IV-.Compound-Angle Injection with Shaped Holes,” ASME Paper No.97-GT-272, Presented at the ASME/IGTI Turbo Expo '97, Orlando, FL, June 2-5, 1997, ASME Journal of Turbomachinery, 122, 1133-144 (2000).
Pan, W., Cui, Y., Leylek, J.H., Sommer, R.G., and Jain, S.K., “A CFD Study of Losses in a Straight-Six Diesel Engine,” SAE Paper No.1999-01-0230, Presented at the 1999 SAE International Congress and Exposition, Detroit, MI, March 1999, SAE Journal of Engines (1999).
McGrath, E.L.and Leylek, J.H., “Physics of Hot Crossflow Ingestion in Film Cooling,” Presented at the ASME/IGTI Turbo Expo '98, Stockholm, Sweden, June 2-5, 1998, ASME Journal of Turbomachinery, 121, 532-541 (1999).
Taylor, W., Leylek, J.H., Sommer, R.G., and Jain, S.K., “IC Engine Intake Region Design Modifications for Loss Reduction Based on CFD Methods,” SAE Paper No.981026, Presented at the 1998 SAE International Congress and Exposition, Detroit, MI, February 23-26, 1998, SAE Journal of Engines (1998).
Cui, Y., Pan, W., Leylek, J.H., Sommer, R.G., and Jain, S.K., “Cylinder-to-Cylinder Variation of Losses in Intake Regions of IC Engines,” SAE Paper No.981025, Presented at the 1998 SAE International Congress and Exposition, Detroit, MI, February 23-26, 1998, SAE Journal of Engines (1998).
Taylor, W., Tran, L.T., Leylek, J.H., Shinogle, R.D., and Jain, S.K., “Advanced Computational Methods for Predicting Flow Losses in Intake Regions of Diesel Engines,” SAE Paper No.97-0639, Presented at the 1997 SAE International Congress and Exposition, Detroit, MI, February 24-27, 1997, SAE Journal of Engines (1997).
Walters, D.K.and Leylek, J.H., “A Systematic Computational Methodology Applied to a Three-Dimensional.Film-Cooling Flowfield,” ASME Paper No.96-GT-351, ASME Journal of Turbomachinery, 119 (4), 777-785 (1997).
Hah, C.and Leylek, J.H., “Numerical Solution of Three-Dimensional Turbulent Flows for Modern Gas Turbine Components,” International Journal of Turbo & Jet-Engines, 10 (3), (1995).
Leylek, J.H.and Zerkle, R.D., “Discrete-Jet Film Cooling: A Comparison of Computational Results with Experiments,” ASME Journal of Turbomachinery, 116 (3), 358-368 (1994).
Leylek, J.H.and Wisler, D.C., “Mixing in Axial Flow Compressors: Conclusions Drawn from Three-Dimensional Navier-Stokes Analyses and Experiments,” ASME Journal of Turbomachinery, 113 (2), 139-160 (1991).
Journal Publications — Scott Holloway
Holloway, D.S., Walters, D.K., and Leylek, J.H., 2004, "Prediction of Unsteady, Separated Boundary Layer over a Blunt Body for Laminar, Turbulent, and Transitional Flow," International Journal for Numerical Methods in Fluids, 45:12, pp. 1291-1315.
Conference Publications — Scott Holloway
York, W. D., Holloway, D.S. and Leylek, J. H., 2005, "Prediction of Heat Transfer in a Ribbed Channel: Evaluation of Unsteady RANS Methodology," ASME Paper No. GT2005-68821.
Holloway, D.S., Walters, D.K., and Leylek, J.H., 2005, "Computational Study of Jet-in-Crossflow and Film Cooling using a New Unsteady-Based Turbulence Model," ASME Paper No. GT2005-68155.
Holloway, D.S. and Leylek, J.H., 2004, "A New Unsteady-Based Turbulence Model to Predict Shear Layer Rollup and Breakdown," ASME Paper No. HT-FED2004-56367.
Holloway, D.S., Walters, D.K., and Leylek, J.H., 2003, "A Practical Perturbation-Based Unsteady CFD Methodology," ISABE Paper No. 2003-1214.
Holloway, D.S., Leylek, J.H. and Buck, F.A., 2002, "Pressure-Side Bleed Film Cooling: Part I-Steady Framework for Experimental and Computational Results," ASME Paper No. GT-2002-30471.
Holloway, D.S., Leylek, J.H. and Buck, F.A., 2002, "Pressure-Side Bleed Film Cooling: Part II-Unsteady Framework for Experimental and Computational Results," ASME Paper No. GT-2002-30472.
Journal Publications — Mary Holloway
Holloway, M.V., Beasley, D.E., and Conner, M.E., 2008, “Single-Phase Convective Heat Transfer in Rod Bundles,” Nuclear Engineering and Design, 238, no. 4, pp. 848-858.
Holloway, M.V., Conover, T.A., McClusky, H.L., Beasley, D.E., and Conner, M.E., 2005, “The Effect of Support Grid Design on Azimuthal Variation in Heat Transfer Coefficients for Rod Bundles,” Journal of Heat Transfer, 127, pp. 598-605.
Holloway, M.V., McClusky, H.L., Beasley, D.E., and Conner, M.E., 2004, “The Effect of Support Grid Features on Local, Single-Phase Heat Transfer Measurement in Rod Bundles,” Journal of Heat Transfer, 126, pp. 43-53.
McClusky, H.L., Holloway, M.V., Conover, T. A., Beasley, D. E., Conner, M. E., and Smith, L D. III., 2003, “Mapping of the Lateral Flow Field in Typical Subchannels of a Support Grid with Vanes,” Journal of Fluids Engineering, 125, pp. 987-996.
McClusky, H.L., Holloway, M.V., Beasley, D.E., and Ochterbeck, J.M., 2002, “Continuous Wavelet Transforms of Instantaneous Wall Pressure in Slug and Churn Upward Gas-Liquid Pipe Flow,” Journal of Fluids Engineering, 124, pp. 625-633.
McClusky, H.L., Holloway, M.V., Beasley, D.E., and Conner, M.E., 2002, “Development of Swirling Flow in a Rod Bundle Subchannel,” Journal of Fluids Engineering, 124, pp. 747-755.
Conference Publications — Mary Holloway
Conner, M.E., and Holloway, M.V., 2007, “Heat Transfer Coefficient Variations in Nuclear Fuel Rod Bundles,” accepted to Proceedings of the 2007 International LWR Fuel Performance Meeting, San Fransico, CA, September 30-October 3, Paper 1030.
Holloway, M. V., and Weber, F.J., 2007, “Infinite Mass Testing of a Scaled Parachute using a Tow Tank Facility,” Proceedings of the 19th AIAA Aerodynamic Decelerator Systems Technology Conference, Williamsburg, VA, 21-24 May 2007, AIAA 2007-2565.
Holloway, M.V., Beasley, D.E., and Conner, M.E., 2006, “Investigation of Swirling Flow in Rod Bundle Subchannels Using Computational Fluid Dynamics,” Proceedings of the International Conference on Nuclear Engineering, ICONE14-89068, July 17-20, 2006.
Holloway, M.V., Beasley, D.E., and Conner, M.E., 2006, “Effect of Lateral Flow Structures on Circumferential Heat Transfer Variations in Rod Bundles,” 9th Joint AIAA/ASME Thermophysics and Heat Transfer Conference, June 5-8, 2006, AIAA 2006-3791.
Conner, M.E., Smith, L.D., Holloway, M.V., and Beasley, D.E., 2005, “Heat Transfer Coefficient Testing in Nuclear Fuel Rod Bundles with Mixing Vane Grids,” Proceedings of the 2005 Water Reactor Fuel Performance Meeting, Kyoto, Japan, October 2-6 2005, Paper 1022, Track 2, pp. 1-6.
Holloway, M.V., Beasley, D.E., and Conner, M.E., 2005, “Development of a Convective Heat Transfer Measurement Technique for Flow Downstream of Support Grids in Rod Bundles,” Proceedings of the 2005 ASME Heat Transfer Conference, HT2005-71259, pp. 1-9.
Conner, M.E., Smith, L.D., Holloway, M.V., and Beasley, D.E., 2004, “Lateral Flow Field Behavior Downstream of Mixing Vanes in a Simulated Nuclear Fuel Rod Bundle,” Proceedings of ICAPP 2004, Pittsburgh, PA, June 13-17 2004, Paper 4082.
Clayton, D.W., Conner, M.E., Holloway, M.V., and Beasley, D.E., “Air Test Facility for Simulation of Heat Transfer in Rod Bundles,” Proceedings of the ANS 2004 Annual Meeting, Pittsburgh, PA, June 13-17, 2004.
Holloway, M.V., Conover, T.A., McClusky, H.L., Beasley, D.E., and Conner, M.E., 2003, “The Effect of Support Grid Design on Azimuthal Variation in Heat Transfer Coefficients for Rod Bundles,” Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, IMECE2003-41939.
Holloway, M.V., McClusky, H.L., Beasley, D.E., and Conner, M.E., 2003, “The Effect of Support Grid Features on Local, Single-Phase Heat Transfer Measurements in Rod Bundles,” Proceedings of the 2003 ASME Summer Heat Transfer Conference, HT2003-47433.
Holloway, M.V., McClusky, H.L., and Beasley, D.E., 2003, “Streamwise Development of Co-Rotating, Paired Vortices Created by Tangential Injection,” Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference, FEDSM2003-45581.
McClusky, H.L., Holloway, M.V., Conover, T. A., Beasley, D. E., Conner, M. E., and Smith, L D. III., 2003, “Mapping of the Lateral Flow Field in Typical Subchannels of a Support Grid with Vanes,” Proceedings of the 11th International Conference on Nuclear Engineering, ICONE11-36268.
Smith, L.D. III., Conner, M.E., Liu, B., Dzodzo, M.B., Paramonov, D.V., Beasley, D.E., Langford, H.M, and Holloway, M.V., 2002, “Benchmarking Computational Fluid Dynamics For Application to PWR Fuel,” ICONE10-22475, pp. 1-8.
Armfield, M.V., Langford, H.M., Beasley, D.E., and Conner, M.E., 2001, “The Effect of Swirling Flow on Rod Bundle Heat Transfer,” Proceedings of the 2001 ASME National Heat Transfer Conference, NHTC01-1778, pp. 1-7.
Langford, H.M., Armfield, M.V., Beasley, D.E., and Conner, M.E., 2001, “A Study of the Isolated Effect of Swirling Flow on Convective Heat Transfer in a Rod Bundle,” Proceedings of the 2001 ASME National Heat Transfer Conference, NHTC01-121311, pp. 1-8.
Armfield, M.V., Langford, H.M., Beasley, D.E., and Conner, M.E., 2001, “Single-Phase Turbulent Rod Bundle Heat Transfer,” Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, IMECE2001/HTD-24116, pp. 1-12.
Langford, H.M., Armfield, M.V., Beasley, D.E., and Conner, M.E., 2001, “Particle Image Velocimetry of Swirling Flow in a Subchannel of a Rod Bundle,” Proceedings of the ASME Fluids Engineering Division Summer Meeting, FEDSM2001-18007.
Armfield, M.V., Langford, H.M., Beasley, D.E., and Conner, M.E., 2000, “Average Heat Transfer Coefficient Measurements in a Fuel Bundle: Method Development,” Proceedings of the ASME Heat Transfer Division, HTD-366-2, pp. 163-170.
Langford, H.M., Armfield, M.V., Kennedy, R.M., and Beasley, D.E., 2000, “Chaos in Upward Gas-Liquid Churn Flow: On-Off Perturbation of Air Flow,” Proceedings of the 2000 ASME Fluids Engineering Division Summer Meeting, FEDSM2000-11235, pp. 1-8.
Langford, H.M., Armfield, M.V., and Beasley, D.E., 1999, “Wavelet Analysis of Upward Gas-Liquid Flow,” Proceedings of the 3rd Annual ASME/JSME Joint Fluids Engineering Conference, FEDSM99-7377, pp. 1-7.