Portal:Publications

From Clemson Engineering Design Applications and Research

Jump to: navigation, search
The design group at Clemson University
188 articles in English

This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.

Contents

[edit] Journals and Book Chapters

Journal Impact Factor

[edit] 2014

  1. Morkos, B., Mathieson, J., Summers, J., (2014), “Comparative Analysis of Requirements Change Prediction Models: Manual, Linguistic, and Neural Network”, Research in Engineering Design, 25 (2), pp 139-56, doi: 10.1007/s00163-014-0170-z. on-line FINAL SUBMISSION
  2. Namouz, E., Summers, J., (2014), “Comparison of Graph Generation Methods for Structural Complexity Based Assembly Time Estimation”, Journal of Computing and Information Science in Engineering, 14 (2), pp. 021003-021003-9, doi: 10.1115/1.4026293. on-line FINAL SUBMISSION
  3. Morkos, B., Summers, J., Thoe, S., (2014), “A Comparative Survey of Domestic and International Experiences in Capstone Design”, International Journal of Engineering Education, 30 (1), pp. 79-90. on-line FINAL SUBMISSION
  4. Miller, M., Summers, J., Mathieson, J., Mocko, G., (2014), “Manufacturing Assembly Time Estimation Using Structural Complexity Metric Trained Artificial Neural Networks”, ASME Journal of Computing and Information Science in Engineering, 14 (1), pp. doi:10.1115/1.4025808. on-line FINAL SUBMISSION
  5. Owensby, J., Summers, J., (2014), “Assembly Time Estimation: Assembly Mate Based Structural Complexity Metric Predictive Modeling”, ASME Journal of Computing and Information Science in Engineering, 14 (1), pp. doi:10.1115/1.4025808. on-lineFINAL SUBMISSION
  6. Srirangam, M., Anandan, S., Summers, J., (2014), “Development of a Geometric Model Retrieval System: A Comparative Case Study”, International Journal of Computer Aided Engineering Technology, 6 (2), pp. 113-38. DOI: 10.1504/IJCAET.2014.060295 on-line FINAL SUBMISSION
  7. Worinkeng, E., Joshi, S., Summers, J., (2014), “An experimental study: analyzing requirement type influence on novelty and variety of generated solutions”, International Journal of Design Creativity and Innovation, 2 (4), DOI: 10.1080/21650349.2014.909294 on-line
  8. Salmi, A., David, P., Summers, J.D., Blanco, E. (2014), “A modelling language for assembly sequences representation, scheduling and analyses”, International Journal of Production Research, DOI: 10.1080/00207543.2014.916432 on-line

[edit] 2013

  1. Summers, J., (2013), “Researching Engineering Design: Successful Integration of Education, Practice, and Study in the CEDAR Group”, Journal of the South Carolina Academy of Sciences, 11 (1) DRAFT. on-line
  2. Dandurand, B., Guarneri, P., Fadel, G., Wiecek, M., (2013), "Equitable Multi-Objective Optimization Applied to the Design of a Hybrid Electric Vehicle Battery", Journal of Mechanical Design, 135 (4), 041004-041004-8, doi: 10.1115/1.4023553 on-line.
  3. Reneke, J., Wiecek, M., Fadel, G., Samson, S., (2013), "Multidisciplinary design optimisation under uncertainty: an information model approach", International Journal of Vehicle Design 61 (1), pp. 249-284, doi: on-line.
  4. Guarneri, P., Leverenz, J., Wiecek, M., Fadel, G., (2013), "Optimization of nonhierarchically decomposed problems", Journal of Computational and Applied Mathematics, Volume 246, July 2013, Pages 312–319, on-line
  5. Sen, C., Summers, J., Mocko, G., (2013), “A Formal Representation of Function Structure Graphs for Computer-Directed Modeling and Conservation-Based Reasoning”, Journal of Computing and Information Science in Engineering, 13 (2), doi: 10.1115/1.4023167. on-line
  6. Cairco, L., Ulinksi, A., McClendon, J., Bloodworth, T., Mathieson, J., Hodges, L., Summers, J., (2012), “Evaluation of System-Directed Multimodal Systems for Vehicle Inspection”, Journal of Computing and Information Science in Engineering, 13 (1), doi: 10.1115/1.4023004. on-line
  7. Sen, C., Summers, J., Mocko, G., (2013), “Physics-Based Reasoning in Conceptual Design using a Formal Representation of Function Structure Graphs”, Journal of Computing and Information Science in Engineering, 13 (1), doi:10.1115/1.4023488. on-line
  8. Miller, W., Summers, J., (2012), “Investigation into Design Tool and Method Use by Capstone Design Students at Clemson University”, International Journal of Technology and Design Education, in press December 2012, DOI: 10.1007/s10798-012-9227-3, on-line.
  9. Morkos, B., Summers, J., (2013), “A Study of Designer Familiarity with Product and User During Requirement Elicitation”, International Journal of Computer Aided Engineering Technology, 5 (2/3) pp. 139-158. doi: 10.1504/IJCAET.2013.052934. DRAFT
  10. Veisz, D., Namouz, E., Joshi, S., Summers, J., (2013), “Computer-Aided Design versus Sketching: An Exploratory Study”, Artificial Intelligence in Engineering Design Analysis and Manufacturing, 26 (3), pp. 317-335, DOI: 10.1017/S0890060412000170. DRAFT on-line
  11. Dandurand, B., Guarneri, P., Fadel,G., Wiecek, M.M.,(2013), “Bilevel multiobjective packaging optimization for automotive design”, Structural and Multidisciplinary Optimization Journal, in press.
  12. Gibert, J., Daqaq, M., and Fadel, G.M., (2013), “On the Stick-Slip Dynamics in Ultrasonic Additive Manufacturing”, Journal of Sound & Vibration, April, 2013 doi: 10.1016/j.jsv.2013.04.007i
  13. Wang, W., Blouin, V. Y., Gardenghi, M.K., Wiecek., M., Fadel, G.M. and Sloop, B.C., “A Cutting Plane Method for Analytical Target Cascading with Augmented Lagrangian Coordination”, Journal of Mechanical Design,in press.

[edit] 2012

  1. Caldwell, B., Mocko, G., (2012), “Validation of Function Pruning Rules through Similarity at Three Levels of Abstraction”, Journal of Mechanical Design, 134 (4) 041008. doi: 10.1115/1.4006264. on-line
  2. Schultz, J., Griese, D., Ju, J., Shankar, P., Summers, J., Thompson, L., (2012), “Design of Honeycomb Mesostructures for Crushing Energy Absorption”, Journal of Mechanical Design, 134 (7), DOI: 10.1115/1.4006739. on-line
  3. Berglind, L., Ju, J., Summers, J., (2012), “Tapered Aluminum Structure Shear Band for a Non-Pneumatic Tire”, Tire Science and Technology, Vol. 40, No. 3, pp. 152-170. DRAFT on-line
  4. Mathieson, J., Wallace, B., Summers, J., (2012), “Estimating Assembly Time with Connective Complexity Metric Based Surrogate Models”, International Journal of Computer Integrated Manufacturing, on-line May 21, 2012, DOI: 10.1080/0951192X.2012.684706 DRAFT
  5. Ameri, F., Kayyar, M., Summers, J., Biggers, S., (2012), “A Case Study of the Development of a Design Enabler Tool to Support Frame Analysis for Wright Metal Products, a US SME”, International Journal of Computer Aided Engineering and Technology, 4 (4), pp. 321-339, ISSN (Online): 1757-2665 and ISSN (Print): 1757-2657. DRAFT
  6. Caldwell, B., Thomas, J., Sen, C., Mocko, G., Summers, J., (2012), “The Effects of Language and Pruning on Function Structure Interpretability”, ASME Journal of Mechanical Design, 134 (6), DOI: 10.1115/1.4006442. DRAFT on-line
  7. Smith, G., Richardson, J., Summers, J., Mocko, G., (2012), “Concept Exploration Through Morphological Charts: An Experimental Study”, Journal of Mechanical Design, 134 (5), DOI: 10.1115/1.4006261. DRAFT on-line
  8. Shankar, P., Morkos, B., Summers, J., (2012), “Reasons for Change Propagation: A Case Study in an Automotive OEM”, Research in Engineering Design, 23 (4), pp. 291-303 (DOI: 10.1007/s00163-012-0132-2). DRAFT on-line
  9. Morkos, B., Summers, J., Mears, M., Rilka, T., Taiber, J., Fadel, G., (2012), “Mobile Devices within Manufacturing Environments: A BMW Applicability Study”, International Journal on Interactive Design and Manufacturing (IJIDeM), 6 (2), pp. 101-111. DOI: 10.1007/s12008-012-0148-x. DRAFT on-line
  10. Morkos, B., Shankar, P., Summers, J., (2012), “Predicting Requirement Change Propagation Using Higher Order Design Structure Matrices: An Industry Case Study”, Journal of Engineering Design, on-line, February 2012. DOI:10.1080/09544828.2012.662273. DRAFT
  11. Ju, J., Summers, J., Ziegert, J., Fadel, G., (2012), "Design of Honeycombs for Modulus and Yield Strain in Shear", Transactions of the ASME: Journal of Engineering Materials and Technology, 134, (1): (15 pages)on-line Journal-2012-JEMT-Honeycombs Abstract DRAFT
  12. Czech, C., 'Guarneri, P., Gibert, J., Fadel, G., (2012), "On the accurate analysis of linear elastic-meta-material properties for use in design optimization problems", Composites Science and Technology, 72 (5) pp. 580-586. on-line
  13. Czech, C., Guarneri, P., Wiecek, M.M., and Fadel, G.M., “Optimality Conditions for Topology Optimization Problems Targeting Meta-material Properties”, Submitted to Structural and Multidisciplinary Optimization Journal, April 2012.
  14. Guarneri, P., J. Leverenz, Fadel, G.M., and Wiecek, M.M,, “Optimization of Non-hierarchically decomposed problems” Invited paper for submission to the Journal of Computation and Applied Mathematics, February 2012
  15. Dandurand, B., Guarneri, P., Fadel, G.M., and Wiecek, M.M., “Equitable Multiobjective Optimization Applied to the Design of a Hybrid Electric Vehicle Battery” Accepted for publication in the Journal of Mechanical Design, April 2012
  16. Wang, W., Blouin, V. Y., Gardenghi, M.K., Wiecek., M., Fadel, G.M. and Sloop, B.C., “A Cutting Plane Method for Analytical Target Cascading with Augmented Lagrangian Coordination”, accepted for publication in the Structural and Multidisciplinary Optimization Journal, April 2012
  17. Reneke, J., Samson, S., Wiecek, M., Fadel, G., “Multidisciplinary Design Optimization under uncertainty: An Information Model Approach”, Accepted for publication in the International Journal of Vehicle Design, January 2012.

[edit] 2011

  1. Caldwell, B., Sen, C., Mocko, G., Summers, J., (2011), “An Empirical Study of the Expressiveness of the Functional Basis”, Artificial Intelligence in Engineering Design Analysis and Manufacturing, 25 (3):273-87. (on-line Nov. 2010), on-line. DRAFT
  2. Ju, J., Summers, J., (2011) "Compliant Hexagonal Periodic Lattice Structures Having Both High Shear Strength and High Shear Strain," Materials & Design, 32(2):512-524.on-line DRAFT
  3. Ju, J., Summers, J., (2011), Hyperelastic Constitutive Modeling of Hexagonal Honeycombs Subjected to In-Plane Shear loading, Transactions of the ASME: Journal of Engineering Materials and Technology, 133(1):011005-1-8 on-line DRAFT
  4. Hannah, R., Joshi, S., Summers, J., (2012), “A User Study of Interpretability of Engineering Design Representations”, Journal of Engineering Design, on-line October 2011, on-line. DRAFT
  5. Sen, C., Summers, J., Mocko, G., (2011), “A Protocol to Formalize Function Verbs to Support Conservation-Based Model Checking”, Journal of Engineering Design, on-line Sept. 2011, DOI: 10.1080/09544828.2011.603295. on-line DRAFT
  6. Kauffman, G., Blouin, V., Triana, D., Cole, C., Summers, J., Joseph, P., (2011), “Design of Lunar Wheel Treads Made of Textile Fabrics”, AATCC Review, vol. 11, no. 3 (May/June), pp. 44-52 (ISSN 1532-8813). DRAFT
  7. Tiwari, S., Fadel, G., Deb, K., (2011), “AMGA2: Improving the Performance of the Archive-based Micro Genetic Algorithm for Multi-objective Optimization”, Journal of Engineering Optimization, 43 (4), pp. 377-401. on-line
  8. Sallaou, M., Pailhes, J., Nadeau, J., Fadel, G., (2011), “Energy Based Functional Decomposition in Preliminary Design”, Journal of Mechanical Design, 133 (5), pp. 051011. on-line
  9. Dong, H., Fadel, G., Guarneri, P., (2011), “Bi-level Approach to Vehicle Component Layout and Shape Morphing”, Journal of Mechanical Design, 133 (4), pp. 041008, on-line
  10. Bhatt, V., Fadel, G.M. and Samson, S., “Study of the effects of diversity in multi-objective optimization”, submitted to the journal of Structural and Multidisciplinary Optimization, Nov, 2009.

[edit] 2006 to 2010

  1. Summers, J., Shah, J., (2010), “Mechanical Engineering Design Complexity Metrics: Size, Coupling, and Solvability”, Journal of Mechanical Design, vol. 132, no. 2, (doi:10.1115/1.4000759). on-line. Journal-2010-JMD-Complexity Abstract (NOTE: was in the Top 10 Downloads list for JMD for January, February, and March 2010.)
  2. Sen, C., Caldwell, B., Summers, J.D., Mocko, G., (2010), “Evaluation of the Functional Basis using an Information Theoretic Approach," Artificial Intelligence in Engineering Design Analysis and Manufacturing, vol. 24, no. 1, pp. 87-105 (doi:10.1017/S0890060409990187). Journal-2010-AIEDAM-Information Content of Function Models Abstract DRAFT
  3. Ju, J., Ananthasayanam,B. Summers, J.D., Joseph,P. (2010), "Design of Cellular Shear Bands of a Non-Pneumatic Tire – Investigation of Contact Pressure," SAE International Journal of Passenger Cars – Mechanical Systems, 3(1):598-606 on-line Journal-2010-SAE-Shear-Bands Abstract
  4. Berglind, L, Ju, J., and Summers, J.D., (2010), "Method to Design Honeycombs for a Shear Flexible Structure," SAE International Journal of Passenger Cars – Mechanical Systems, 3(1):588-597 on-line Journal-2010-SAE-Honeycombs Abstract
  5. Maier, J., Troy, T., Johnston, P., Bobba, V., Summers, J., (2010), "Case Study Research Using Senior Design Projects: An Example Application", Journal of Mechanical Design, vol. 132, no. 11, (doi:doi:10.1115/1.4002291). on-line Journal-2010-JMD-CaseStudy Abstract
  6. Sen, C., Ameri, F., Summers, J., (2010), "An Entropic Method for Sequencing Discrete Design Decisions", Journal of Mechanical Design, vol. 132, no. 10, DOI: 10.1115/1.4002387. on-line Journal-2010-JMD-Entropic Abstract
  7. Sen, C., Summers, J., Mocko, G., (2010), "Topological Information Content and Expressiveness of Function Models in Mechanical Design", Journal of Computing and Information Science in Engineering, vol. 10, no. 3, DOI: 10.1115/1.3462918. on-line. Journal-2010-JCISE-Topology Abstract (NOTE: was in the Top 10 Downloads list for JCISE for September and October 2010.)
  8. Wetmore, W., Summers, J., Greenstein, J., (2010), "Experimental Study of Influence of Group Familiarity and Information Sharing on Design Review Effectiveness", Journal of Engineering Design, vol. 21, no. 1, pp. 111-26, (DOI: 10.1080/09544820802238217). on-line Journal-2010-JED-InfoSharing Abstract
  9. Kim, I., Bajaj, M., Mocko, G., Peak, R.S., (2010), “Metrics for Degree-of-Openness of Engineering Information”, Journal of Computing and Information Science in Engineering, 10 (1) doi: 10.1115/1.3330429 on-line
  10. Grujicic, M., Arakere, G., Bell, W., Marvi, H., Yalavarthy, H., Pandurangan, B., Haque, I., Fadel, G., (2010), “Reliability-based Design Optimization for Durability of Ground-vehicle Suspension-system Components,” Journal of Materials Engineering and Performance, 19, (3), pp. 301 on-line
  11. Gibert, J., Austin, E., Fadel, G.M., (2010) “Effect of Height to Width Ratio on the dynamics of Ultrasonic Consolidation”, Rapid Prototyping Journal Vol. 16 No 4., pp 284-294 Outstanding Paper Award Winner at the Literati Network Awards for Excellence 2011'
  12. Tiwari, S., Fadel, G.M., and Fenyes, P., “A Fast and Efficient Compact Packing Algorithm for the SAE and ISO Luggage Packing Problems”, J. Comput. Inf. Sci. Eng. 10, 021010 (2010).
  13. Reneke, J., Wiecek., M., Fadel, G., Samson, S., Nowak, D., (2010), “Design under uncertainty – Balancing expected performance and risk”, Journal of Mechanical Design, 132 (11), pp. 111009 on-line
  14. Shahrokhi, M., Bernard, A., and Fadel, G.M., “An Approach to optimize an avatar trajectory in a virtual workplace”, Journal of Computer Integrated Manufacturing, 24: 2, pp.95-105 December 2010.
  15. Motyka, M, Maier, J.R.A., and Fadel, G.M. (2010). “Representing the Complexity of Engineering Systems: A Multidisciplinary Perceptual Approach” in Unifying Themes in Complex Systems, Volume VI. AA Minai, D Braha, and Y. BarYam, eds. New York: Springer. Pages 564-571.
  16. Tiwari, S., Fadel, G.M., Fenyes, P., Kloess, A., “An Envelop Generation Algorithm for Packing and Layout Applications”, submitted to the ASME Journal of Computers and Information Science in Engineering (JCISE), December 2009
  17. Morkos, B., Shankar, P., Teegavarapu, S., Michaelraj, A., Summers, J., (2009), "Conceptual Development of Automotive Forward Lighting System Using White Light Emitting Diodes", SAE International Journal of Passenger Cars - Electronic and Electrical Systems, vol. 2, no. 1, pp. 201-11. Journal-2009-SAE-LED Headlamp DRAFT
  18. Ameri, F., Summers, J., (2009), “Multi-Agent Systems in Engineering Design of Fixture Systems”, Handbook of Research on Artificial Intelligence in Industrial Information Systems, ed. W. Zha, IGI Publishing, Heshey, PA, (in press May 2009). Journal-2009-Agents-Handbook DRAFT
  19. Miller, W., Summers, J., (2009), "Tool and Information Centric Design Process Modeling: Three Case Studies", Handbook of Research on Trends in Product Design and Development, ed. A. Silva and R. Simoes, IGI Publishing, Hershey, PA, (accepted January 2009; revision submitted May 2009). DRAFT
  20. Pehlivan, S., Ameri, F., Summers, J., (2009), “An Agent-Based System Approach to Fixture Design”, International Journal of Computer Applications in Technology, vol. 36, no. 3/4, pp. 284-96, (DOI: 10.1504/IJCAT.2009.028050). DRAFT
  21. Summers, J., Bayanker, S., Gramophadye, A., (2009), “Experimental Investigation of Input Device Suitability for CAD Operations”, Computer-Aided Design and Applications, vol. 6, no. 5, pp. 595-612. (DOI: 10.3722/cadaps.2009.595-612). DRAFT
  22. Powers, L., Summers, J., (2009), “Integrating Graduate Design Coaches in Undergraduate Design Project Teams”, International Journal of Mechanical Engineering Education, vol. 37, no. 1, pp. 3-20 (ISSN 0306-4190). DRAFT
  23. Summers, J., Teegavarapu, S., Anandan, S., (2009), “Introduction of Design Enabling Tools – Development, Validation, and Lessons Learned”, Tools for Innovation, ed. A. Markman, Oxford Press, Cambridge, MA, Oxford Press, Cambridge, MA, (ISBN 10: 0195381637). EXEMPLAR DRAFT
  24. Tiwari, S., Teegavarapu, S., Summers, J., Fadel, G., (2009), “Automating Morphological Chart Exploration: A Multi-Objective Genetic Algorithm to Address Compatibility and Uncertainty”, International Journal of Product Development, vol. 9, nos. 1-3, pp. 111-39 (DOI: 10.1504/IJPD.2009.026176). DRAFT
  25. Ostergaard, K., Summers, J., (2009), “Development of a Systematic Classification and Taxonomy of Collaborative Design Activities”, Journal of Engineering Design, vol. 20, no. 1, pp. 57-81. (DOI: 10.1080/09544820701499654). DRAFT online
  26. Maier, J.R.A, Fadel, G.M., (2009) “Affordance Based Design Methods for Innovative Design, Redesign and Reverse engineering”, Research in Engineering Design, Volume 20, Number 4, Pages 225-239.
  27. Tiwari, S., Teegavarapu, S., Summers, J.D., and Fadel, G.M. (2009), “Automating Morphological Chart Exploration: A Multi-Objective Genetic Algorithm to Address Compatibility and Uncertainty”, International Journal of Product Development, Vol. 9, No 1, 2, 3, pp 111-139.
  28. Maier, J.R.A., Fadel, G.M., and Battisto, D. (2009) “An affordance based approach to architectural theory, design and practice”, Design studies. Vol. 30, pp 393-414
  29. Wiecek, M., Blouin, V.Y., Fadel, G.M., Engau, A., Hunt, B.J., Singh, V., (2009) Multi-scenario Multi-Objective Optimization in Engineering Design, Special Springer Lecture Notes in Economics and Mathematical Systems LNEMS volume of MOPGP, Vol. 618 Barichard, V.; Ehrgott, M.; Gandibleux, X.; T'Kindt, V. (Eds.) XV, pp 283-295
  30. Maier, J.R.A. and Fadel, G.M., (2009) “Affordance Based Design: A Relational Theory for Design”, Research in Engineering Design, 2009, Volume 20, Number 1, Pages 13-27
  31. Yi Miao, Fadel, G.M., and Gantovnik, V. B., (2008) “Vehicle Configuration design with a packing Genetic Algorithm”, International Journal of Heavy Vehicle Systems, Vol. 15 No 2/3/4, pp 433-448
  32. Maier, J.R.A. and Fadel, G.M., (2008) “A Taxonomy and Decision support for the design and manufacture of types of product families”, Special issue on product families, Journal of Intelligent Manufacturing, Vol. 18, No. 1 pp 31-45
  33. Hu, Y., Blouin, V. and Fadel, G.M., (2008), “Design for manufacturing of 3D heterogeneous objects with processing time considerations”, J. Mech. Des. 130, 031701 (2008)
  34. Baladi, M., Vitali, H., Fadel, G.M., Summers, J. and Duchowski, A., (2008) "A Taxonomy for the Design and Evaluation of Networked Virtual Environments- Its Application to Collaborative Design", International Journal on Interactive Design and Manufacturing IJIDeM Vol. 2, pp 17-32
  35. Ameri, F., Summers, J., Mocko, G., Porter, M., (2008), “Engineering Design Complexity: An Experimental Study of Methods and Measures”, Research in Engineering Design, (in press August 2008) on-line (impact factor: 0.667).
  36. Snider, M., Summers, J., Teegavarapu, S., (2007), “Database Support for Reverse Engineering, Product Teardown, and Redesign as Integrated into a Mechanical Engineering Course”, ASEE Computers in Education Journal, vol. 19, no. 4, pp. 9-21. (online [1]). DRAFT
  37. Ostergaard, K., Summers, J., (2008), “Development of a Systematic Classification and Taxonomy of Collaborative Design Activities”, Journal of Engineering Design, (on-line first) (DOI: 10.1080/09544820701499654). JED-url (impact factor: 0.844).
  38. Ameri, F., Summers, J., (2008), “FIXON: An Ontology for Representation of Fixture Design Knowledge”, Computer-Aided Design and Applications, vol. 5, no. 5, pp. 601-11. on-line.
  39. Wetmore, W., Summers, J., Greenstein, J., (2008), “Experimental Study of Influence of Group Familiarity and Information Sharing on Design Review Effectiveness”, Journal of Engineering Design, (online-first) (10.1080/09544820802238217) on-line. (impact factor: 0.844).
  40. Chavali, S., Sen, C., Mocko, G., Summers, J., (2008), "Using Rules Based Design in Engineer to Order Industry: An SME Case Study", Computer-Aided Design and Applications, vol. 5, no. 1-4, pp. 178-93. on-line. Journal-2008-CAD Applications-Rules Based Design Abstract
  41. Pehlivan, S., Summers, J., (2008), “A Review of Computer-Aided Fixture Design with Respect to Information Support Requirements”, International Journal of Production Research, vol. 46, no. 4, pp. 929-47. (DOI: 10.1080/00207540600865386); on-line.
  42. Baladi, M., Vitali, H., Fadel, G., Summers, J., Duchowski, A., (2008), “A Taxonomy for the Design and Evaluation of Networked Virtual Environments: Its Application to Collaborative Design”, International Journal on Interactive Design and Manufacturing, vol. 2, no. 1, pp. 17-32. (DOI: 10.1007/s12008-007-0032-2).
  43. Grujicic, M., Pandurannan, B., Summers, J., Cheeseman, B., Roy, W., (2007), “Application of the Modified Compaction Material Model to Soil with Various Degrees of Water Saturation”, Shock and Vibration, vol. 15, no. 1, pp. 79-99. on-line.
  44. Teegavarapu, S., Snider, M., Summers, J., Thompson, L., Grujicic, M., (2007), “A Driver for Selection of Functionally Inequivalent Concepts at Varying Levels of Abstraction”, Journal of Design Research, vol. 6, no. 1&2, pp. 218-38. on-line (impact factor: 0.560)
  45. Ostergaard, K., Summers, J., (2007), “Resistance Based Modeling of Collaborative Design”, Concurrent Engineering Research and Applications, vol. 15, no. 1, pp. 21-32. on-line (impact factor: 0.482)
  46. Baladi, M., Vitali, H., Fadel, G., Summers, J., Duchowski, A., (2007), “A Taxonomy for the Design and Evaluation of Networked Virtual Environments – Its Application to Collaborative Design”, Research in Interactive Design - Vol. 2, eds. X. Fischer and D. Coutellier, Springer Verlag, ISBN-10: 2287483632.
  47. Grujicic, M. Pandurangan, B., Mocko, G., Cheeseman, B., Skaggs, R., “A Combined Multi-Material Euler/Lagrange Computational Analysis of Blast Loading Resulting from Detonation of Buried Landmines,” Multidiscipline Modeling in Materials and Structures, (accepted March 2007).
  48. Anandan, S., Summers, J., (2006), “Similarity Metrics Applied to Graph Based Design Model Authoring”, Computer-Aided Design and Applications, vol. 3, no. 1-4, pp. 297-306. on-line EXEMPLAR
  49. Summers, J., Divekar, A., Anandan, S., (2006), “Towards Establishing the Design Exemplar as a CAD Query Language”, Computer-Aided Design and Applications, vol. 3, no. 1-4, pp. 523-532. on-line EXEMPLAR
  50. Ohland, M., Summers, J., (2006), “Teaching Design Using Multiple Hierarchical Engineering Education Models”, International Journal of Engineering Education, vol. 22, no. 3. on-line (impact factor: 0.356)
  51. Steinemann, A, Taiber, J., Fadel, G.M., and Kunz, A., “Samson: Adaption of Discrete-Event simulation tools to support tactical forecasting in the automotive Industry” submitted to the journal Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering, March 2010
  52. Maier, J.R.A., Mocko, G., Summers, J., and Fadel, G.M., “Multi-domain Design Information Modeling and Mapping” Submitted to Design Studies, April 2009
  53. Dong, H., Tiwari, S., Fadel, G.M., Fenyes, P., Kloess, A., “A Physically based Shape Morphing Algorithm for Packing and Layout Applications”, Submitted ASME Journal of Mechanical Design, May 2009, August 2009
  54. Wiecek, M., Blouin, V.Y., Fadel, G.M., Engau, A., Hunt, B.J., Singh, V., (2009) Multi-scenario Multi-Objective Optimization in Engineering Design, Special Springer Lecture Notes in Economics and Mathematical Systems LNEMS volume of MOPGP, Vol. 618 Barichard, V.; Ehrgott, M.; Gandibleux, X.; T'Kindt, V. (Eds.) XV, pp 283-295
  55. Maier, J. and Fadel, G.M., (2008) “A Taxonomy and Decision support for the design and manufacture of types of product families”, Special issue on product families, Journal of Intelligent Manufacturing, Vol. 18, No. 1 pp 31-45
  56. Weber, J., and Fadel, G., “Opportunities and Hindrances to Collaborative Automotive Development” Paper 2006-01-1469 SAE Transactions Journal of Materials and Manufacturing, 2006. Judged among the most outstanding technical research published in 2006
  57. Hu, Y., Fadel, G.M., Blouin, V., and White, D. (2006) “Optimal Design for Additive Manufacturing of Heterogeneous Objects Using Ultrasonic Consolidation” Invited paper, Journal of virtual and physical prototyping, Vol. 1, No. 1, pp. 53-62
  58. Ramanath, V. and Fadel, G.M., “Quantifying the degree of non-linearity of the design space” Paper accepted for publication in the Structural and Multidisciplinary Optimization Journal, August 2006 – withdrawn pending additional results

[edit] 2000 to 2005

  1. Ostergaard, K., Wetmore, W., Divekar, A., Vitali, H., Summers, J., (2005), “An Experimental Methodology for Investigating Communication in Collaborative Design Review Meetings”, CoDesign, 1 (3), pp. 169-85. on-line
  2. Mocko, G., Paasch, R., 2005, “Incorporating Uncertainty in Diagnostic Analysis of Mechanical,” ASME Journal of Mechanical Design, vol. 127, no. 2, pp. 315-25.
  3. Summers, J., Bettig, B., Shah, J., (2004), “The Design Exemplar: A New Data Structure for Embodiment Design Automation”, Journal of Mechanical Design, 126 (5), pp. 775-87. on-line EXEMPLAR (impact factor: 1.20)
  4. Lacroix, Z., Summers, J., Shah, J., (2002), “Principes et Modèles pour la Gestion des Points de Vue en CAO”, Genie Industriel, F. Darses (ed.), University Press of Grenoble (in French). EXEMPLAR
  5. Bettig, B., Shah, J., Summers, J., (2001), “Geometric Exemplars: A Bridge between AI and CAD”, From Knowledge Intensive CAD to Knowledge Intensive Engineering, Cugini and Wozny (eds.), Kluwer Academic Press, Netherlands, pp. 45-58. ISBN 0792376196. EXEMPLAR
  6. Summers, J., Shah, J., (2001), “Leadership Style Selection Rules for Agent Architecture in Engineering Design”, From Knowledge Intensive CAD to Knowledge Intensive Engineering, Cugini and Wozny (eds.), Kluwer Academic Press, Netherlands, pp. 13-26. ISBN 0792376196. EXEMPLAR
  7. Summers, J., Maxwell, D., Camp, C., Butler, A., (2001), “Features as a Design Paradigm for Early Stage Submarine Design”, ASNE – The Naval Engineers Journal, 113 (4), pp. 53-67. (impact factor: 0.070)
  8. Shah, J., Vargas-Hernandez, N., Summers, J., Kulkarni, S., (2001), “Collaborative Sketching (C-Sketch): An Idea Generation Technique for Engineering Design”, Journal of Creative Behavior, Vol., 35, No. 3, pp. 168-98. [abstract] on-line (impact factor: 0.406)
  9. Weber, J., and Fadel, G., “Opportunities and Hindrances to Collaborative Automotive Development” Paper 2006-01-1469 SAE Transactions Journal of Materials and Manufacturing, 2006. Judged among the most outstanding technical research published in 2006
  10. Hu, Y., Fadel, G.M., Blouin, V., and White, D. (2006) “Optimal Design for Additive Manufacturing of Heterogeneous Objects Using Ultrasonic Consolidation” Invited paper, Journal of virtual and physical prototyping, Vol. 1, No. 1, pp. 53-62
  11. Haghiac, H., Haque, I and Fadel, G.M. (2004) ‘An assessment of a genetic algorithm-based approach for optimising multi-body systems with applications to vehicle handling performance’, Int. J. Vehicle Design, Vol. 36, No. 4, pp.320-344
  12. Grignon, P. and Fadel, G.M., (2004) “A GA based Configuration Design Optimization Method”, ASME Journal of Mechanical Design, Vol. 126.1, pp 6-15,.
  13. Blouin, V. Y., Fadel, G.M., Haque, I., J. R. Wagner, J.R., and Samuels, H.B., “Continuously Variable Transmission Design for Optimum Vehicle Performance by Analytical Target Cascading”, Special edition of the International Journal of Heavy Vehicle Systems, Vol 11 No 3/ 4 pp 327-348, 2004
  14. Li, Y., Fadel, G.M., Wiecek, M., and Blouin, V., “ Minimum Effort Generation of the Pareto Space of Convex Bi-criteria Problems”, Journal of Optimization and Engineering, 4,231-261, 2003
  15. Fadel, G.M., Blouin V. Y. and Haque, I., “Continuously Variable Transmission Design for Optimum Vehicle Performance by Analytical Target Cascading” Invited technical note in Business Briefing: Global Automotive Manufacturing and Technology, April 2003
  16. Chakarvartula, S., Haque, I., Fadel, G.M., "A Monte-Carlo Simulation Approach to Heavy Vehicle Design for Good Dynamic Performance in Multiple Scenarios," International Journal of Heavy Vehicle Systems, Vol 10, Nos.1/2 pp 112-143, 2003
  17. Huang, J., Fadel, G.M., Blouin, V. and Grujicic, M. “Bi-objective Optimization Design of Functionally Gradient Materials”, Journal of materials, design and applications, Vol. 23/7 pp 657-666, 2002.
  18. Holzer, F. and Fadel, G.M. “Design of a 3-degrees of Freedom Platform for the Stereolithography Apparatus” Rapid Prototyping Journal, Vol. 8.2, pp. 100-115, 2002
  19. Fadel, G.M. and Li, Y. “Approximating the Pareto Curve to help solve Bi-objective Design Problems”, Structural and Multidisciplinary Optimization Journal, Vol. 23 No.4, pp 280-296, 2002
  20. Grujicic, M., Hu, Y., Fadel, G.M. and Keicher, D.M., “Optimization of the LENSTM Rapid Fabrication Process for In-Flight Melting of Feed Powder”, Journal of Materials Synthesis and Processing, 9, pp. 223-233, 2002.
  21. Fadel, G.M., Li, Y., Konda, S., Wiecek, M.,and Ruzika, S. “Detecting Local Convexity on the Pareto Surface”, Journal of Multicriteria Decision Analysis, Vol 11, pp 45-54, 2002.
  22. Grujicic, M., Cao, G and Fadel, G.M., “Effective Materials properties: Determination and application in Mechanical Design and Optimization”, Journal of materials, design and applications, Vol. 215, no. L4, pp. 225-234 (10) 2001
  23. Huang, J., Fadel, G.M., “Bi-Objective Optimization Design of Heterogeneous Injection Mold Cooling Systems”, ASME Journal of Mechanical Design, Vol 123.2. pp. 225-239, 2001.
  24. Figliola, R.S., Tipton, R. and Fadel, G.M., “Thermal Optimization of an Aircraft Subsystem based on energy analysis”, SAE Transactions – Journal of Aerospace. 2000-01-5527 Judged among the most outstanding technical research published in 2000.
  25. Huang, J., Fadel, G.M., “Heterogeneous Flywheel Modeling and Optimization”, invited paper, Journal of Materials and Design, Vol. 21 pp.111-125. 2000.

[edit] pre 2000

  1. Tata, K., Fadel, G.M., Bagchi, A., Aziz, N. “Efficient Slicing for Layered Manufacturing”, Rapid Prototyping Journal, Vol. 4-4, pp.151-167, 1998 – Winner of the Highly Commended Paper Award.
  2. Kirschman, C., Fadel, G.M. ”Classifying Functions for Mechanical Design”, ASME Journal of Mechanical Design, Vol. 120.3, pp. 475-482, 1998.
  3. Fadel, G.M. and Kirschman, C. “Accuracy Issues in CAD to RP Translations”, Rapid Prototyping Journal, Vol. 2, No. 2. pp. 4-17, 1996.
  4. Tatineni, S., Fadel, G.M., “Coupling Through Move-limits in Multi-Disciplinary Optimization”, Structural Optimization, Vol. 11, No.1/2, pp. 50-56. 1996.
  5. Frank, D., Fadel, G.M., “Expert System Based Selection of the Preferred Direction of Build for Rapid Prototyping Processes”, Special Issue on AI Applications in Design for Manufacturing and Concurrent Engineering, Journal of Intelligent Manufacturing. Vol. 6, pp. 334-339, 1995.
  6. Fadel, G.M. and Cimtalay, S., “Automatic Evaluation of Move-Limits in Structural Optimization”, Structural Optimization, Vol. 6. pp. 233-237, 1993.
  7. Fadel, G.M., Jeter, S.M., “Bracketing and Convergence in Thermal Systems Simulation”, Journal of Applied Mathematical Modeling', Vol. 17, No 4. pp. 195-204, April 1993.
  8. Leblanc, A. R. and Fadel, G.M., “Design Data Storage and Extraction Using Objects”, International Journal of Concurrent Engineering, Research and Applications, Vol. 1. pp. 31-38, January 1993.
  9. Fadel, G. M., Riley, M. F., Barthelemy, J. F. M., “Two Point Exponential Approximation Method for Structural Optimization”. Structural Optimization, Vol. 2, pp. 117-129, 1990.
  10. Jeter, S. M., Wepfer, W. J., Fadel, G.M., Cowden, N. E. and Dymek, A. A., “Variable Speed Drive Heat Pump Performance,” Energy, Vol. 12, No. 12,1987.
  11. Jeter, S. M., Wepfer, W. J., Fadel, G.M., Cowden, N. E. and Dymek, A. A., “Analysis and Simulation of Variable Speed Heat Pumps” Chapter 4 in Strategies for Energy Efficient Plants and Intelligent Buildings, pp. 545-550, 1986.

[edit] Refereed Conferences

[edit] 2014

  1. Phelan, K., Wilson, C., Summers, J., Kurz, M., (2014), “A Case Study of Configuration Management Methods in a Major Automotive OEM”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-34186. FINAL DRAFT
  2. Joshi, S., Summers, J., (2014), “Tracking Project Health Using Completeness and Specificity of Requirements: A Case Study”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-35020. FINAL DRAFT PRESENTATION
  3. Joshi, S., Summers, J., (2014), “Impact if Requirement Elicitation on Idea Generation: A Designer Study”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-35026. FINAL DRAFT
  4. Worinkeng, E., Summers, J., (2014), “Analyzing Requirement Type Influence on Concept Quality and Quantity during Ideation: An Experimental Study”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-35014. FINAL DRAFT
  5. Hess, T., Summers, J., (2014), “Protocol Analysis: Studying Physical Manipulatives During Conceptual Design”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-34183. FINAL DRAFT
  6. Summers, J., Morkos, B., Joshi, S., (2014), “Requirements Evolution: Relating Functional and Non-Functional Requirement Change on Student Project Success”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-35023. FINAL DRAFT
  7. Wilson, C., Phelan, K., Summers, J., (2014), “Developing an On-Line Design for X Rules Repository”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-34187. FINAL DRAFT
  8. Fazelpour, M., Summers, J., (2014), “Evolution of Meso-Structures for Non-Pneumatic Tire Development: A Case Study”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-34184. FINAL DRAFT PRESENTATION
  9. Moylan, J., O’Shields, S., Satterfield, Z., Smentek, B., Gendreau, E., Heustess, C., Addis, R., Reynolds, W., Scott, H., Summers, J., (2014), “Off-Vehicle Tire Traction and Endurance Testing System”, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Buffalo, NY, DETC2014-34177. FINAL DRAFT
  10. Shankar, P., Phelan, K., Summers, J., (2014), “A Verification and Validation Planning Method to Manage Change Propagation in Production/Development”, Tools and Methods of Competitive Engineering, Budapest, Hungary, May 19-23, 2014, no. 74. FINAL DRAFT
  11. Phelan, K., Summers, J., Guarneri, P., (2014), “Engineering Change Management - Verification, Validation, and Testing Planning Tool Development”, Tools and Methods of Competitive Engineering, Budapest, Hungary, May 19-23, 2014, no. 73. FINAL DRAFT

[edit] 2013

  1. Renu, R., Peterson, M., Mocko, G., Summers, J., (2013), “Automated Navigation of Method Time Measurement (MTM) Tables for Automotive Assembly Line Planning”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-13325.on-line DRAFT
  2. Peterson, M., Mocko, G., Summers, J., (2013), “Knowledge Management for Semi-Automated Automotive Assembly Instruction Authorship and Translation”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-13070. on-line DRAFT
  3. Hess, T., Summers, J., (2013), “Case Study: Evidence of Prototyping Roles in Conceptual Design”, International Conference on Engineering Design, no. 204, Seoul, South Korea. DRAFT
  4. Summers, J., Eckert, C., Goel, A., (2013), “Function in Engineering: Benchmarking Representations and Models”, International Conference on Engineering Design, no. 248, Seoul, South Korea. DRAFT
  5. Le Dain, M., Blanco, E., Summers, J., (2013), “Assessing Design Research Quality: Investigating Verification and Validation Criteria”, International Conference on Engineering Design, no. 283, Seoul, South Korea. DRAFT
  6. Prudhomme, G., Pourroy, F., Summers, J., (2013), “Enriching Requirement-Activities in Design through French-US Instruction Comparison”, International Conference on Engineering Design, no. 368, Seoul, South Korea. DRAFT
  7. Summers, J., Rosen, D., (2013), “Mechanical Engineering Modeling Language: Foundations”, International Conference on Engineering Design, no. 404, Seoul, South Korea. DRAFT
  8. Namouz, E., Summers, J., (2013), “Comparison of Graph Generation Methods for Structural Complexity Based Assembly Time Estimation”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12300. on-line DRAFT
  9. Thimmaiah, S., Summers, J., (2013), “An Experimental Study: Predicting Design Performance with and without Controls”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12294. on-line DRAFT
  10. Satterfield, Z., McDougald, M., Mims, N., Moylan, J., O’Shields, S., Smentek, B., Summers, J., (2013), “Experimental Studies on Traction Concepts: Endurance and Obstacle Testing”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12296. on-line FINAL DRAFT
  11. Thoe, S., Summers, J., (2013), “Correlating Problem/Process Complexity to Anticipated Effort”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12301. on-line DRAFT
  12. Fazelpour, M.¸ Summers, J., (2013), “A Comparison of Design Approaches to Meso-Structure Development”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12295. on-line DRAFT
  13. Shankar, P., Fazelpour, M., Summers, J., (2013), “An Energy-Based Design Approach for a Meso-Structures with High Shear Flexure”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, DETC2013-12292. on-line DRAFT
  14. Shanthakumar, A., Summers, J., (2013), “Design Enabler to Recognize Duplicate Geometries in CAD Assemblies”, CAD Conference, Torino, Italy. DRAFT
  15. Namouz, E., Summers, J., (2013), “Complexity Connectivity Metrics -- Predicting Assembly Times with Low Fidelity Assembly CAD Models”, in Smart Product Engineering, eds. Abramovici, M. and Stark, R., "Lecture Notes in Production Engineering", Vol. 5, Springer, Heidleberg, Germany, pp. 777-786, ISBN: 978-3-642-30816-1. DRAFT
  16. Worinkeng, E., Summers, J., Joshi, S., (2013), "Can a Pre-sketching Activity Improve Idea Generation?", in Smart Product Engineering, eds. Abramovici, M. and Stark, R., "Lecture Notes in Production Engineering", Vol. 5, Springer, Heidleberg, Germany, pp. 583-592, ISBN: 978-3-642-30816-1. DRAFT
  17. Guarneri, PDandurand, B., Fadel, G.M., and Wiecek M.M., “Bilevel multiobjective optimization of vehicle layout”, World Congress of Structural and Multidisciplinary Optimization, Orlando, FL, May 2013.
  18. Xu, M., Wang, W., Guarneri, P., and Fadel, G.M., “CADMM applied to Hybrid Network Decomposition”, World Congress of Structural and Multidisciplinary Optimization, Orlando, FL, May 2013.
  19. Mao, Q., Wang, W., Xu, M., and Fadel, G.M., “Structural Optimization of Ultrasonic Sonotrode Using Integration of Modefrontier and Abaqus”, World Congress of Structural and Multidisciplinary Optimization, Orlando, FL, May 2013.
  20. Fernandez, L.F., Guarneri, P., and Fadel, G.M., Topology Optimization using the Material Density as a level set function », World Congress of Structural and Multidisciplinary Optimization, Orlando, FL, May 2013.
  21. Braha, D., Brown, D.C., Chakrabarti, A., Dong, A., Fadel, G.M., Maier, J.R.A., Seering, W., Ullman, D.G., and Wood, K., “DTM At 25: Essays on themes and Future Directions, Paper No. DETC2013-12280. on-line

[edit] 2012

  1. Morkos, B., Joshi, S., Summers, J., (2012), “Representation: Formal Development and Computational Recognition of Localized Requirement Change Types”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-71417. DRAFT
  2. Miller, M., Mathieson, J., Summers, J., Mocko, G., (2012), “Representation: Structural Complexity of Assemblies to Create Neural Network Based Assembly Time Estimation Models”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-71337. DRAFT
  3. Namouz, E., Summers, J., Mocko, G., (2012), “Reasoning: Source of Variability in the Boothroyd and Dewhurst Assembly Time Estimation Method”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-71075. DRAFT
  4. Rayate, V., Summers, J., (2012), “Representations: Reconciling Design for Disassembly Rules with Design for Manufacturing Rules”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, August 2012, DETC2012-70987. DRAFT
  5. Miller, M., Griese, D., Summers, J., Peterson, M., Mocko, G., (2012), “Representation: Installation Process Step Instructions as an Automated Assembly Time Estimation Tool”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, August 2012, DETC2012-70109. DRAFT
  6. Owensby, E., Namouz, E., Shanthakumar, A., Summers, J., (2012), “Representation: Extracting Mate Complexity from Assembly Models to Automatically Predict Assembly Times”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-70995. DRAFT
  7. Peterson, M., Mocko, G., Summers, J., (2012), “Evaluating and Comparing Functional and Geometric Complexity of Product”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-71408. DRAFT
  8. Joshi, S., Summers, J., (2012), “Representation: Metrics for Analyzing Sketches”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, DETC2012-71425. DRAFT
  9. Sen, C., Summers, J., (2012), “A Pilot Protocol Study on How Designers Construct Function Structures in Novel Design”, 5th International Conference on Design Computing and Cognition, College Station, TX, June 2012. DRAFT
    1. NOTE: Nominated for Best Paper award (was selected as the number 2 paper in the conference)
  10. Mandhata, U., Jensen, M., Wagner, J., Switzer, F., Dawson, D., Summers, J., (2012), “Evaluation of a Customizable Haptic Feedback System for Ground Vehicle Steer-by-Wire Interfaces”, 2012 American Control Conference, Montreal, Canada, No. 671, July 2012. DRAFT
  11. Shankar, P., Mathieson, J., Ramachandran, R., Summers, J., Mocko, G., (2012), “Review of the Design Tools and Methods to Predict Change Propagation Pathways”, TMCE 2012, Karlsruhe, Germany, No. 39. DRAFT
  12. Joshi, S., Morkos, B., Shankar, P., Summers, J., (2012), “Requirements in Engineering Design: What are We Teaching?”, TMCE 2012, Karlsruhe, Germany, No. 38. DRAFT
  13. Ma, J., Summers, J., (2012), “FE-Simulation of Tread Profile Effects on the Performance of the Cellular Shear Band Based Non-Pneumatic Tire”, SAE World Congress, 2012-01-0768, Tire and Terrain Modeling Techniques and Applications, Detroit, MI, April 2012. DRAFT
  14. Czech, C., Guarneri, P., and Fadel, G.M., “Using Non-Simply Connected Unit Cells in the Multiscale Analysis of Meta-Materials”, 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September, 2012.
  15. Gibert, J.M., Daqaq, M.F., and Fadel, G.M., “Nonlinear Dynamics in Ultrasonic Additive Manufacturing” ASME DETC 2012- Paper DETC2012-70567
  16. Wang, W., Xu, M, Fadel, G.M., and Blouin, V., “A Distributed Coordination via consensus optimization for Analytical Target Cascading”, 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September, 2012.
  17. Czech, C., Guarneri, P., and Fadel, G.M., “Meta-material design of the shear layer of a non-pneumatic wheel using topology optimization”, ASME DETC 2012- Paper DETC2012-71340
  18. Katragadda, R.T., Gondipalle, S.R., Guarneri, P., and Fadel, G.M., “Predicting the thermal performance for the multi-objective vehicle underhood packing optimization problem”, ASME DETC 2012- Paper DETC2012-71098
  19. Wang, W., Guarneri, P., Blouin, V., and Fadel, G.M., “Network Target Coordination for Optimal Design of Decomposed Systems with Consensus Optimization”, ASME DETC 2012- paper DETC2012-70333
  20. Nguyen, M.T., Fadel, G.M., Guarneri, P., and Mata, I., “Genetic Algorithms applied to Affordance Based Design”, Accepted for presentation at the ASME DETC 2012 – Paper DETC2012-70332
  21. Hu, J., Fadel, G.M., “ Categorizing Affordances for Product Design”, ASME DETC 2012- Paper DETC2012-70933

[edit] 2011

  1. Ma, J., Summers, J., (2011), “Numerical Simulation of Tread Effects on the Interaction between Cellular Shear Band Based Non-pneumatic Tire and Sand”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47044. []
  2. Ma, J., Summers, J., (2011), “Numerical Investigation of Effect of Membrane Thickness on the performance of Cellular Shear band based Non-pneumatic Tire”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47045.
  3. Hess, T., Bowman, M., Morkos, B., Summers, J., (2011), “Cross Analysis of Metal Foam Design Parameters for Achieving Desired Fluid Flow”, ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, CO, November 2011, IMECE2011-64916.
  4. Joshi, S., Morkos, B., Summers, J., (2011), “A Coding Scheme for Analyzing Capstone Design Reports: Problem and Solution Descriptions”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47154.
  5. Joshi, S., Morkos, B., Summers, J., (2011), “Mapping Problem and Requirements to Final Solution: A Document Analysis of Capstone Design Projects”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47471.
  6. Owensby, E., Shanthakumar, A., Namouz, E., Rayate, V., Summers, J., (2011), “Evaluation and Comparison of Two Design for Assembly Methods: Subjectivity of Information”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47530. paper
  7. Ma, J., Summers, J., (2011), “Application of Meshless Integral Method in Soil Mechanics”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47046.
  8. Schultz, J., Griese, D., Shankar, P., Summers, J., Ju, J., Thompson, L., (2011), “Optimization of Honeycomb Cellular Meso-Structures for High Speed Impact Energy Absoprtion”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-48000.
  9. Ju, J., Summers, J., (2011), “Shear Compliant Hexagonal Cellular Structures with a Shape Memory Alloy”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-48790.
  10. Mathieson, J., Shanthakumar, A., Sen, C., Summers, J., Stone, R., (2011), “Complexity as a Surrogate Mapping between Function Models and Market Value”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47481.
  11. Mathieson, J., Thompson, M., Satterfield, H., Satterfield, Z., Kraus, E., Summers, J., (2011), “Comparative Experimental Studies on Prototyped Traction Concepts”, ASME International Design Engineering Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47480.
  12. Griese, D., Namouz, E., Shankar, P., Summers, J., Mocko, G., (2011), “Application of a Lightweight Engineering Tool: Lazy Parts Analysis and Redesign of a Remote Controlled Car”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-47544.
  13. Veeramurthy, M., Ju, J., Thompson, L., Summers, J., (2011), “Optimization of a Non-Pneumatic Tire for Reduced Rolling Resistance”, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Washington, DC, September 2011, DETC2011-48730.
  14. Mathieson, J., Miller, M., Summers, J., (2011), “A Protocol for Connective Complexity Tracking in the Engineering Design Process”, International Conference on Engineering Design 2011, Copenhagen, Denmark, August, 2011 No. 657. Conference_ICED_Connective
  15. Sen, C., Summers, J., (2011), “Exploring Potentials for Conservational Reasoning Through Formal Representations of Product Functions”, International Conference on Engineering Design 2011, Copenhagen, Denmark, August 2011, No. 630. Conference_ICED_Function
  16. Osborn, J., Summers, J., Mocko, G., (2011), “Review of Collaborative Engineering Environments: Software, Hardware, Peopleware”, International Conference on Engineering Design 2011, Copenhagen, Denmark, August 2011, No. 354. Conference_ICED_CDE
  17. Palmer, G., Summers, J., (2011), “Characterization of Leadership within Undergraduate Engineering Design Teams through Case Study Analysis”, International Conference on Engineering Design 2011, Copenhagen, Denmark, August 2011, No. 204. Conference_ICED_Leadership
  18. Richardson, J., Summers, J., Mocko, G., (2011), “Function Representations in Morphological Charts: An Experimental Study on Variety and Novelty of Means Generated”, 21st CIRP Design Conference, Daejeon, South Korea, March 2011, No. 30. Conference_CIRP_MorphCharts
  19. Ma, J., Summers, J., Joseph, P., (2011), “Dynamic Impact Simulation of Interaction between a Non-Pneumatic Tire and Sand with Obstacle”, SAE World Congress, M501 Load Simulation and Analysis in Automotive Engineering: Tire and Terrain Modeling Techniques and Applications, Detroit, MI, April 2011, No. 11M-0161/2011-01-0184.
  20. Namouz, E., Caldwell, B., Summers, J., Mocko, G., Mears, L., Obieglo, A., (2011), “Lazy Parts Indication Method: Application to Automotive Components”, SAE World Congress, M404: Achieving Light Weight Vehicles, Detroit, MI, April 2011, 11M-0227/2011-01-0428.
  21. Czech, C., Guarneri, P., and Fadel, G.M., “On the accurate analysis of meta-material properties for application to design optimization problems”. Proceedings of fifth International Conference on Advanced Computational Methods in Engineering, ACOMEN 2011, Nov 14-17, 2011, Belgium
  22. Guarneri, P., Wiecek, M.M, and Fadel, G.M., “Optimization of Non-hierarchically decomposed problems” Proceedings of fifth International Conference on Advanced Computational Methods in Engineering, ACOMEN 2011, Nov 14-17, 2011, Belgium
  23. Bhatt, V., Fadel, G.M., and Samson, S. “Study of the effects of diversity in multi-objective optimization”, paper presented at ICARAME11, June 2011, Lebanon
  24. Fadel, G.M., “Packing and layout optimization”, paper presented at ICARAME11, June 11, Lebanon.
  25. Zhu, Y.F., Yang, J.Q., Fadel, G.M., Wang, C.M., “Heterogeneous objects design and manufacturing: Multimaterials three dimensional printing system” paper presented at ICHMM-2011, Shanghai, China
  26. Guarneri, P., Fadel, G.M., “Optimization of non-hierarchically decomposed problems”, submitted to WCSMO June 2011, accepted, and withdrawn (Tsunami)
  27. Wang, W., Gardenghi, M., Wiecek, M., Blouin, V., Fadel, G.M., Guarneri, P., „On the use of bi-objective optimization for analytical target cascading“, submitted to WCSMO June 2011, accepted, and withdrawn (Tsunami)
  28. Hu, J., Fadel, G.M., Wood, I., Napieralski, P., Babu, S., „Prototyping process of a virtual reality treadmill system for exploration of real world panoramic environments“, VRAP 2011 conference, Leira, Portugal, September, 2011
  29. Steinemann, A., Taiber, J., Fadel, G.M. , Wagener, K., Kunz, A., „ Samson: Adapting discrete event simulation tools to support tactical forecasting in the automotive industry“, TMCE 2012
  30. Thyagaraja, N., Shankar, P., Fadel, G.M., and Guarneri, P., “Optimizing the shear beam of a non-pneumatic wheel for low rolling resistance”, ASME DETC11 conference proceedings, paper DETC2011-48532

[edit] 2006 to 2010

  1. Stowe, D., Thoe, S., Summers, J., (2010), “Prototyping in Design of a Lunar Wheel – Comparative Case Study of Industry, Government, and Academia”, Aeronautical Industry in Queretaro Conference SAE, Queretaro, Mexico, Oct. 2010. Conf-2010-SAE-Prototyping Abstract
  2. Mathieson, J., Wallace, B., Summers, J., (2010), “Assembly Time Modeling Through Connective Complexity Metrics”, International Conference on Manufacturing Automation, Hong Kong, Dec. 2010, no. 20. Conf-2010-ICMA-Complexity DFA Abstract
  3. Namouz, E., Summers, J., Mocko, G., Obieglo, A., (2010), “Workshop for Identifying Assembly Time Savings: An OEM Empirical Study”, International Conference on Manufacturing Automation, Hong Kong, Dec. 2010, no. 22. Conf-2010-ICMA-Workshop Abstract
  4. Joshi, S., Summers, J., (2010), "Investigating Information Loss in Collaborative Design: A Case Study", Capstone Design Conference, Boulder, CO, 2010. Conf-2010-Capstone-Loss Abstract
  5. Morkos, B., Summers, J., (2010), "Implementing Design Tools in Capstone Design Projects: Requirements Elicitation Through Use of Personas", Capstone Design Conference, Boulder, CO, 2010. Conf-2010-Capstone-Personas Abstract
  6. Ma, J., Summers, J., Joseph, P., (2010), “Simulation Studies on the Influence of Obstacles on Rolling Lunar Wheel”, ASME International Design Engineering Technical Conferences, CIE-AMS, Montreal, Canada, August, 2010, DETC2010-29160. Conf-2010-DETC-Rolling Abstract
  7. Berglind, L., Summers, J., (2010), “Direct Displacement Synthesis Method for Shape Morphing Skins Using Compliant Mechanisms”, ASME International Design Engineering Technical Conferences, Mechanisms-MR-5, Montreal, Canada, August, 2010, DETC2010-28546. Conf-2010-DETC-Displacement Abstract
  8. Ju, J., Summers, J., Ziegert, J., Fadel, G., (2010), “Compliant Hexagonal Meso-Structures Having Both High Shear Strength and High Shear Strain”, ASME International Design Engineering Technical Conferences, MR, Montreal, Canada, August, 2010, DETC2010-28672. Conf-2010-DETC-Complicant Abstract
  9. McLellan, M., Morkos, B., Mocko, G., Summers, J., (2010), “Requirement Modeling Systems for Mechanical Design-Analysis of Current Tools and Languages”, ASME International Design Engineering Technical Conferences, CIE-SIEKM, Montreal, Canada, August, 2010, DETC2010-28989. Conf-2010-DETC-Modeling Systems Abstract
  10. Shankar, P., Morkos, B., Summers, J., (2010), "A Hierarchical Modeling Scheme with Non-Functional Requirements”, ASME International Design Engineering Technical Conferences, CIE-CAPPD, Montreal, Canada, August, 2010, DETC2010-28544. Conf-2010-DETC-Non-Functional Abstract
  11. Schultz, J., Sen, C., Mathieson, J., Caldwell, B., Summers, J., Mocko, G., (2010), “Limitations to Function Structures: A Case Study in Morphing Airfoil Design”, ASME International Design Engineering Technical Conferences, DTM, Montreal, Canada, August, 2010, DETC2010-28559. Conf-2010-DETC-Function Structure Limitations Abstract
  12. Morkos, B., Joshi, S, Summers, J., Mocko, G, (2010), "Requirements and Data Content Evaluation of Industry In-House Data Management System", ASME International Design Engineering Technical Conferences, CIE, Montreal, Canada, August, 2010, DETC2010-28548. Conf-2010-DETC-Data Management Abstract
  13. Mathieson, J., Summers, J., (2010), “Complexity Metrics for Directional Node-Link System Representations: Theory and Applications”, ASME International Design Engineering Technical Conferences, DTM, Montreal, Canada, August, 2010, DETC2010-28561.Conf-2010-DETC-Complexity Metrics Abstract
  14. Ma, J., Summers, J., Joseph, P., (2010), “Application of Meshless Integral Method to Metal Forming”, ASME International Design Engineering Technical Conferences, CIE-AMS, Montreal, Canada, August, 2010, DETC2010-29066.
  15. Morkos, B., Summers, J., (2010), “Requirement Change Propagation Prediction Approach: Results from an Industry Case Study”, ASME International Design Engineering Technical Conferences, DAC, Montreal, Cananda, August, 2010, DETC2010-28562. Conf-2010-DETC-Requirements Change Abstract
  16. Shankar, P., Ju, J., Summers, J., (2010), “Design of Sinusoidal Auxetic Structures for High Shear Flexure”, ASME International Design Engineering Technical Conferences, CIE-AMS, Montreal, Canada, August, 2010, DETC2010-28545.
  17. Ma, J., Summers, J., Joseph, P., (2010), “Meshless Integral Method for Analysis of Elastoplastic Geotechnical Materials”, ASME International Design Engineering Technical Conferences, CIE-AMS, Montreal, Canada, August, 2010, DETC2010-29069.
  18. Joshi, S., Ju, J.,Berglind, L., Rusly, R., , Summers, J., Desjardins, J., (2010), “Experimental Damage Characterization of Hexagonal Honeycombs Subjected to In-Plane Shear Loading”, ASME International Design Engineering Technical Conferences, DAC, Montreal, Canada, August, 2010, DETC2010-28549. Conf-2010-DETC-Honeycomb Shear Test Abstract
  19. Palmer, G., Morkos, B., Summers, J., (2010), “Investigation of Design Tools as Complexity Management Techniques”, ASME International Design Engineering Technical Conferences, DAC, Montreal, Canada, August, 2010, DETC2010-28554. Conf-2010-DETC-Complexity Abstract
  20. Kolla, A., Ju, J., Summers, J., Ziegert, J., Fadel, G., (2010), “Design of Chiral Honeycomb Meso-Structures for High Shear Flexure”, ASME International Design Engineering Technical Conferences, DAC, Montreal, Canada, August, 2010, DETC2010-28557.
  21. Mandhata, U., Wagner, J., Switzer, F., Dawson, D., Summers, J., (2010), “A Customizable Steer-By-Wire Interface for Ground Vehicles”, 2010 Advances in Automotive Control IFAC Technical Committee 7.1 Automotive Control, Munich, Germany, accepted March 2010, (Wagner is corresponding author).
  22. Cairco, L., Ulinski, A., McClendon, J., Bloodworth, T., Mathieson, J., Hodges, L., Summers, J., (2010), “Interface Design and Display Modalities to Improve the Vehicle Inspection Process”, ASME World Conference on Innovative Virtual Reality, WINVR2010, Ames, IA, May 12-14, accepted March 2010, (Ulinski is corresponding author). Conf-2010-WINVR-Inspections Abstract
  23. Ma, J., Summers, J., Joseph, P., (2010), “Simulation Studies on the Influence of Obstacles on Rolling Lunar Wheel”, ASME International Design Engineering Technical Conferences, CIE-AMS, Montreal, Canada, August, 2010, DETC2010-29106, accepted February 2010.
  24. Caldwell, B.W., Mocko, G.M., (2010), “Functional Similarity at Varying Levels of Abstraction,” ASME International Design Engineering Technical Conferences, August, 2010, Montreal, Canada, DETC2010-28970. Conf-2010-DETC-Functional Similarity Abstract
  25. Hannah, R., Joshi, S., Summers, J., (2010), “A User Study of Interpretability of Engineering Design Representations: Physical and Graphical”, Tools and Methods for Competitive Engineering, Ancona, Italy, April 2010, #52 (podium presentation). Conf-2010-TMCE-Prototype abstract
  26. Morkos, B., Palmer, G., Summers, J., (2010), “A Comparison of Designer Familiarity and Centeredness During Customer Requirement Elicitation”, Tools and Methods for Competitive Engineering, Ancona, Italy, April 2010, #53 (panel presentation; invited for journal special issue). Conf-2010-TMCE-Requirements abstract
  27. Sen, C., Summers, J., Mocko, G., (2010), “Toward a Formal Representation of the Functional Basis Verbs”, Tools and Methods for Competitive Engineering, Ancona, Italy, April 2010, #127 (podium presentation; invited for journal special issue). Conf-2010-TMCE-Function abstract.
  28. Caldwell, B.W., Mocko, G.M., 2010, “A Representation of Artefacts and Interactions to Supplement Function,” Tools and Methods for Competitive Engineering, Ancona, Italy, April 2010, (podium presentation). Conf-2010-TMCE-Interaction Abstract
  29. Morkos, B., Mathieson, J., Summers, J., Matthews, J., (2010), “Development of Endurance Testing Apparatus for Lunar Wheels at Cryogenic Temperatures”, SAE World Congress and Exhibition, AC400-Tire and Wheel Technology, Detroit, MI, April 2010, No. 2010-01-0765. Conf-2010-SAE-Lunar Endurance Abstract
  30. Ma, J., Ju, J. , Ananthasayanam, B., Summers, J., Joseph, P., (2010), “Effects of Cellular Shear Bands on Interaction between a Non-pneumatic Tire and Sand”, SAE World Congress and Exhibition, M105-Load Simulation and Analysis in Automotive Engineering: Tire and Terrain Modeling Techniques and Applications, Detroit, MI, April 2010, No. 2010-01-0376.
  31. Reeves, T., Biggers, S., Joseph, J., Summers, J., Ma, J., (2010), “Exploration of Discrete Element Method to Model Dynamic Sand-Tire Interaction”, SAE World Congress and Exhibition, M105-Load Simulation and Analysis in Automotive Engineering: Tire and Terrain Modeling Techniques and Applications, Detroit, MI, April 2010, No. 2010-01-0375.
  32. Berglind, L. , Ju, J. , Summers, J., (2010), “A Novel Design Method of Honeycomb Meta-Materials for a Flexible Non-Pneumatic Tire Component”, SAE World Congress and Exhibition, AC400-Tire and Wheel Technology, Detroit, MI, April 2010, No. 2010-01-0762. Conf-2010-SAE-Honeycomb Design Abstract
  33. Ju, J. , Ananthasayanam, B., Summers, J., Joseph, P., (2010), “Design of Cellular Shear Bands of a Non-Pneumatic Tire – Investigation of Contact Pressure”, SAE World Congress and Exhibition, AC400-Tire and Wheel Technology, Detroit, MI, April 2010, No. 2010-01-0768.
  34. Kolla, A., Ma, J., Summers, J., Biggers, S., Joseph, J., Blouin, V., (2010), “Development and Qualitative Testing of Traction Concepts as an Undergraduate Experience”, SAE World Congress and Exhibition, B600-Engineering Education, Detroit, MI, April 2010, No. 2010-01-0312. SAE 2010 Sand Traction Paper
  35. Ma, J., Summers, J., Joseph, P., (2010), “Dynamic Simulation of Interaction Between Non-Pneumatic Tire and Sand”, SAE World Congress and Exhibition, M105-Load Simulation and Analysis in Automotive Engineering: Tire and Terrain Modeling Techniques and Applications, Detroit, MI, April 2010, No. 2010-01-0377.
  36. Summers, J.D., Morkos Beshoy, Mears, L., Fadel, G.M., Torsten Rilka, Taiber, J. (2010), "Applicability Evaluation of Mobile Devices for Use Within Manufacturing Environments", IDMME-Virtual Concept 2010, 18-22 October, France
  37. Caldwell, B. W., Mocko, G.M., and Fadel, G.M., “ A representation of artefacts and interactions”, presented at the TMCE conference, Ancona, IT, April 2010
  38. Ma, J., Summers, J., (2009), “Meshless Integral Method for Analysis of Elastoplastic Geotechnical Materials”, ASME International Engineering Congress and Expo, Orlando, FL, Nov. 2009, in review (March 2009; Ma is corresponding author).
  39. Ju, J., Summers, J.,Ziegert, J., Fadel, G. (2009), “Cyclic Energy Loss of Honeycombs under In-Plane Shear Loading”, ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 2009, IMECE2009-12658, Lake Buena Vista, FL.
  40. Ju, J., Summers, J.,Ziegert, J., Fadel, G. (2009), “Nonlinear Elastic Constitutive Relations on Auxetic Honeycombs”, ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 2009, IMECE2009-12654, Lake Buena Vista, FL.
  41. Sen, C., Caldwell, B., Summers, J., Mocko, G., (2009), “Topological Information Content and Expressiveness of Function Models in Mechanical Design”, ASME Design Engineering Technical Conferences, DETC2009-87385, San Diego, CA, Aug. 30-Sep. 2, 2009. Conference-2009-DETC-Topological Information Content Abstract
  42. Ju, J., Summers, J., Ziegert, J., Fadel, G., (2009), “Design of Honeycomb Meta-Materials for High Shear Flexure”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, DAC-DETC2009-87730.
  43. Ma, J., Summers, J., Joseph, P., (2009) “Modeling and Analysis Support for Complex Deformable Systems Interfacing with Crack-Prone Systems”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, CIE-.DETC2009-87725.
  44. Morkos, B., Summers, J., (2009), “Elicitation and Development of Requirements Through Integrated Methods”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, CIE-DETC2009-87720.Conf-2009-DETC-Integrated Methods Abstract
  45. Sen, C., Ameri, F., Summers, J., (2009), “Entropic Method for Sequencing Discrete Design Decisions”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, DAC-DETC2009-87600. Conference-2009-DETC-Design Process Entropy Abstract
  46. Price, Y., Caldwell, B., Richardson, J., Namouz, E., Rotenburg, T., Sen, C., Mocko, G., Summers, J., (2009), “Indication of Lazy Parts in Lightweight Vehicle Development”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, DFMLC-DETC2009-87489. Conf-2009-DETC-Lazy Parts Method Abstract
  47. Caldwell, B., Rotenburg, T., Price, Y., Summers, J., Mocko, G., (2009), “Automotive Lightweight Engineering: A Detailed Evaluation of the Laziness of an Interior Console”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, DFMLC-DETC2009-87388. Conf-2009-DETC-Lazy Parts Console Application Abstract
  48. Thomas, J., Sen, C., Mocko, G., Summers, J., Fadel, G., (2009), “Investigation of Interpretability of Three Function Representations”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, DTM-DETC2009-87381.
  49. Maier, J., McLellan, J., Mocko, G., Fadel, G., (2009), “Lightweight Engineering of Military Vehicle through Requirements Analysis and Function Integration,” ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, Paper No. DETC2009-86562.
  50. Mathieson, J., Sen, C., Summers, J., (2009), “Information Generation through the Design Process: Student Project Case Study”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, CIE-DETC2009-87359. Conference-2009-DETC-Information Generation Abstract
  51. Ma, J., Kolla, A., Summers, J., Joseph, P., Biggers, S., (2009), “Numerical Simulation of New Generation Non-Pneumatic Tire and Sand”, ASME Design Engineering Technical Conferences, San Diego, CA, Aug. 30-Sep. 2, 2009, CIE-DETC2009-87263.
  52. Thoe, S., O’Dell, A., Northup, K., Wallis, K., Merino, J., Torok, M., Orr, M., Summers, J., Blouin, V., Joseph, P., (2009), “Design of a Scaled Off-Vehicle Wheel Testing Device for Textile Tread Wear”, SAE World Congress and Exhibition, Reliability and Robust Design in Automotive Engineering, No. 09IDM-0043.
  53. Teegavarapu, S., Shankar P.,Morkos, B., Kanda, A., Michaelraj, A., Summers, J., Obieglo, A., (2009), “A Morphological, Combinatory Tool for Design of Low-Gap Automotive Body Panels”, SAE World Congress and Exhibition, Reliability and Robust Design in Automotive Engineering, No. 09IDM-0044.
  54. Morkos B.,Shankar, P., Teegavarapu, S., Kanda, A., Michaelraj, A., Summers, J., Obieglo, A., (2009), “Conceptual Development and Analysis of Automotive Forward Lighting Light Emitting Diode System for Mass Reduction”, SAE World Congress and Exhibition, Virtual Design and Engineering, No. 09IDM-0042.
  55. Kaufman, G., Triana, D., Blouin, V., Cole, C., Joseph, P., Summers, J., (2009), “Wear Resistance of Lunar Wheel Treads Made of Polymeric Non-Woven Fabrics”, SAE World Congress and Exhibition, Tire and Wheel Technology, No. 09AC-0109.
  56. Teegavarapu, S., Miller, S., Summers, J., Mocko, G., (2009), “Preliminary Investigation of the Use of Design Methods by Capstone Design Students at a US University”, Proceedings of ASME Asia Pacific Engineering Education Congress, Taipei, Taiwan, April 9-11, 2009, No. 10010.
  57. McLellan, J.M., Maier, J.R.A., Fadel, G.M., Mocko, G.M., ”A Method for Identifying Requirements critical to Mass Reduction using DSMs and DMMs”, DSM09 conference, Greenville, SC.
  58. McLellan, J.M., Maier, J.R.A., Fadel, G.M., Mocko, G.M., “Generating Design Structure Matrices and Domain Mapping Matrices using SYSML”, DSM09 conference, Greenville, SC.
  59. Thomas, J.T., Maier, J.R.A., Fadel, G.M., Mocko, G.M., “Using DMMs to relate design for Assembly rules to Human Interaction Guidelines”, DSM09 conference, Greenville, SC
  60. Maier, J.R.A., Sachs, R. and Fadel, G.M., “A Comparative Study of Quantitative Scales to Populate Affordance Structure Matrices”, ASME-DETC09 conference proceedings, Paper DETC2009-86524
  61. Samson, S., Thoomu, S., Fadel, G.M., Reneke, J., “Reliable Design Optimization under Aleatory and Epistemic Uncertainties”, ASME-DETC09 conference proceedings , Paper DETC 2009-86473
  62. Gibert, J.M., McCullough, D.T., Fadel, G.M.,Martin, G., Austin, E., “Stick-slip Dynamics in Ultrasonic Consolidation”, ASME-DETC09 conference proceedings , Paper DETC2009-86527
  63. Gibert, J.M. and Fadel, G.M., “Numerical experiments in using Voronoi cell finite elements for topology optimization”, ASME-DETC09 conference proceedings , Paper DETC2009-87460
  64. Maier, J.R.A., McLellan, J.M., Mocko, G., and Fadel, G.M., “Lightweight Engineering of Military Vehicles through Requirements Analysis and Function Integration”, ASME-DETC09 conference proceedings, Paper DETC2009-86562
  65. Maier, J.R.A., Mocko, G., Fadel, G.M., “Hierarchical Affordance Modeling”, Paper 314, ICED09 Proceedings
  66. Maier, J.R.A., Sandel, J., Fadel, G.M., “Experiments Comparing Function Structures to Affordance Structures”, Paper 321, ICED09 proceedings
  67. Maier, J., Sandel, J., and Fadel, G.M., “Extending the Affordance Structure Matrix – Mapping Design Structure and Requirements to Behavior”, DSM conference, Stockholm, Nov. 2008
  68. Tiwari, S., Fadel, G.M., and Fenyes, P.,”A fast and efficient compact packing algorithm for free-form objects”, ASME DETC 2008 conference proceedings
  69. Tiwari, S., Koch, P., Fadel, G.M., and Deb, K.,“AMGA: An Archive-based Micro Genetic Algorithm for Multi-objective Optimization”, GECCO 08 conference proceedings
  70. Tiwari, S., Wiecek, M. and Fadel, G.M., ”Inclusion of Preferences in the Design of Evolutionary Optimization Algorithms: An Empirical Study”, AIAA MAO conference, Victoria, CA 2008
  71. Caldwell, B., Sen, C., Mocko, G.M., Summers. J.D. and Fadel, G.M., “Empirical Examination of the functional basis and design repository”, DCC08 conference, Atlanta, GA, June 2008
  72. Tiwari, S., Fadel, G.M., Koch, P., Deb, K. “Performance Assessment of the Hybrid Archive-based Micro Genetic Algorithm (AMGA) on the CEC09 Test Problems”, CEC09 MOEA competition – Nominated for best paper award
  73. Conger, K., Stowe, D., Summers, J., Joseph, P., (2008), “Designing a Lunar Wheel”, ASME-DETC2008, ATTV-49981, Brooklyn, NY, August 3-6, 2008. TWEEL
  74. Hiriyannaiah, S., Mocko, G., (2008), “Information Management Capabilities of MDO Frameworks,” 28th ASME International Conference on Computers and Information in Engineering, New York, NY, Paper No. DETC2008-49934.
  75. Caldwell, B., Mocko, G., (2008), “Product Data Management in Undergraduate Education,” 28th ASME International Conference on Computers and Information in Engineering, New York, NY, Paper No. DETC2008-50015. Conference-2008-DETC PDM in Education Abstract
  76. Caldwell, B., Mocko, G., (2008), “Towards Rules for Functional Composition,” 2008 ASME International Design Engineering Technical Conferences, New York, NY, Paper No. DETC2008-49904. Conference-2008-DETC Functional Composition Abstract
  77. Anandan, S., Srirangam, M., Summers, J., (2008), “A Case Study in the Use of the Design Exemplar as a Search and Retrieval Tool”, ASME-DETC2008, CIE-49975, Brooklyn, NY, August 3-6, 2008. EXEMPLAR
  78. Hannah, R., Michaelraj, A., Summers, J., (2008), “A Proposed Taxonomy for Physical Prototypes: Structure and Validation”, ASME-DETC2008, DAC-49976, Brooklyn, NY, August 3-6, 2008. (pdf) REPRESENTATION
  79. Miller, W., Teegavarapu, S., Summers, J., (2008), “Evaluating Design Tool Use in Engineering Curriculum: A Case Study”, ASME-DETC2008, DED-49978, Brooklyn, NY, August 3-6, 2008. EDUCATION
  80. Teegavarapu, S., Summers, J., Mocko, G., (2008), “Case Study Methods for Design Research”, ASME-DETC2008, DTM-49980, Brooklyn, NY, August 3-6, 2008. DESIGN RESEARCH
  81. Ameri, F., Summers, J., (2008), “FIXON: An Ontology for Representation of Fixture Design Knowledge”, International CAD Conference and Exhibition, Orlando, FL, June 2008. FIXTURES
  82. Chavali, S., Sen, C., Mocko, G., Summers, J., (2008), “Using Rule Based Design in Engineer to Order Industry: An SME Case Study”, International CAD Conference and Exhibition, Orlando, FL, July 2008. DESIGN ENABLER Conference-2008-CAD-Rule Based Design Abstract
  83. Caldwell, B., Sen, C., Mocko, G., Summers, J., Fadel, G., (2008), “An External Evaluation of Hierarchical Modeling within the Design Repository”, Third International Conference on Design Computing and Cognition, Atlanta, GA, July 2008. FUNCTION Conference-2008-DCC-Functional Basis Abstract
  84. Summers, J., Ameri, F., (2007), “An Algorithm for Assessing Design Connectivity Complexity”, Tools and Methods for Competitive Engineering Conference, Izmir, Turkey, April 21-25, 2008. EXEMPLAR draft paper
  85. Kanda, A., Teegavarapu, S., Summers, J., Mocko, G., (2008), “Patent Driven Design: Exploring the Possibility of Using Patents to Drive New Design”, Tools and Methods for Competitive Engineering Conference, Izmir, Turkey, April 21-25, 2008. REPRESENTATION
  86. Teegavarapu, S., Summers, J., Mocko, G., (2008), “Establishing the Need for a Structured Approach to Developing Design Methods”, Tools and Methods for Competitive Engineering Conference, Izmir, Turkey, April 21-25, 2008. DESIGN RESEARCH
  87. Mocko, G., Fadel, G.M., Summers, J.D., Maier, J., and Ezhilan, T., “A systematic method for modeling and analyzing conceptual design information”, proceedings, 9th DSM conference, Munich, Germany, October, 2007.
  88. Engau, A., Fadel, G.M. and Wiecek, M., “A Multi-objective Decomposition-coordination Framework with an Application to Vehicle Layout and Configuration Design”, Proceedings in Applied Mathematics and Mechanics, September 2007
  89. Maier, J., Ezhilan, T., Fadel, G.M., “The Affordance Structure Matrix – A Concept Exploration and Attention Directing Tool for Affordance Based Design”, Proceedings of the IDETC DTM, DETC2007-34526, Las Vegas, NV, Sept 2007.
  90. Information: A Hair Dryer Design Example”, Proceedings of ICED’07, Paris, France, August, 2007
  91. Maier, J., Ezhilan, T., Fadel, G.M., Summers, J.D., and Mocko, G., “A Hierarchical Requirements Modeling Scheme to Support Engineering Innovation”, Proceedings of ICED’07, Paris, France, August 2007.
  92. Maier, J., and Fadel, G.M., “Identifying Affordances”, Proceedings of ICED’07, Paris, France, August 2007.
  93. Gaffney, E.S., Maier, J., and Fadel, G.M., “Roles of Function and Affordance in the Evolution of Artifacts”, Proceedings of ICED’07, Paris, France, August 2007.
  94. Tiwari, S., Summers, J., Fadel, G., (2007), “A Genetic Algorithm Based Procedure for Extracting Optimal Solutions from a Morphological Chart”, ASME-DETC2007, DAC-35497, Las Vegas, NV, Sept. 2007. DESIGN ENABLER
  95. Kayyar, M., Summers, J., Ameri, F., Biggers, S., (2007), “A Case Study of SME Design Process and Development of a Design Enabling Tool”, ASME-DETC2007, DAC-35610, Las Vegas, NV, Sept. 2007. DESIGN ENABLER
  96. Mocko, G., Rosen, D., Mistree, F., (2007), "Decision Retrieval and Storage Enabled Through Description Logic," ASME Design Engineering Technical Conferences, Las Vegas, NV, Paper No. DETC2007-35644.
  97. Kumar, P., Mocko, G., (2007), "Modeling and Analysis of an Ontology of Engineering Design Activities using the Design Structure Matrix", ASME Design Engineering Technical Conferences, Las Vegas, NV, Paper No. DETC2007-35634.
  98. Smith, E., Johnston, P., Summers, J., (2007), “Applying Lean Manufacturing Principles to Revolutionize Curbside Equipment and Collection Process”, ASME-DETC2007, DFLM-35615, Las Vegas, NV, Sept. 2007. APPLICATION
  99. Bapat, V., Bettig, B., Summers, J., (2007), “Requirements-Driven Design Computations in Next-Generation CAD”, International Conference for Engineering Design, Paris, France, Aug. 2007. EXEMPLAR
  100. Mocko, G., Summers, J., Teegavarapu, S., Ezhilan, T., Maier, J., Fadel, G., (2007), “A Modeling Scheme for Capturing and Analyzing Conceptual Design Information: An Application to the Hair Dryer Example and Comparison to Existing Literature”, International Conference for Engineering Design, Paris, France, Aug. 2007. FUNCTION
  101. Maier, J., Ezhilan, T., Fadel, G., Summers, J., Mocko, G., (2007), “A Hierarchical Requirements Modeling Scheme to Support Engineering Innovation”, International Conference for Engineering Design, Paris, France, Aug. 2007. DESIGN ENABLER
  102. Maier, J., Anandan, S., Bapat, V., Summers, J., Bettig, B., (2007), “A Computational Framework for Semantically Rich Design Problems Based on the Theory of Affordances and Exemplar Technology”, International Conference for Engineering Design, Paris, France, Aug. 2007. EXEMPLAR
  103. Anandan, S., Summers, J., Maier, J., Bapat, V., Bettig, B., (2007), “Design Semantics: A Clear Definition Based on a Knowledge View”, International Conference for Engineering Design, Paris, France, Aug. 2007. REPRESENTATION
  104. Bayanker, S., Summers, J., Gramophadye, A., (2006), “Experimental Investigation of Input Device Suitability for CAD Operations”, ASME-DETC2006, CIE-99681, Philadelphia, PA, September 10-13.
  105. Putti, S., Summers, J., (2006), “Dynamic Exemplar Networks: Towards a Mechanical Design Visual Programming Language”, ASME-DETC2006, CIE-99669, Philadelphia, PA, September 10-13. EXEMPLAR
  106. Smith, G., Troy, T., Summers, J., (2006), “Concept Exploration Through Morphological Charts: An Experimental Study”, ASME-DETC2006, DTM-99659, Philadelphia, PA, September 10-13.
  107. Troy, T., Osborn, J., Smith, G., Summers, J., (2006), “Case Study Instrument Development for Studying Collaborative Design”, ASME-DETC2006, DAC-99674, Philadelphia, PA, September 10-13.
  108. Snider, M., Teegavarapu, S., Hesser, D., Summers, J., (2006), “Augmenting Tools for Reverse Engineering Methods”, ASME-DETC2006, DAC-99676, Philadelphia, PA, September 10-13.
  109. Anandan, S., Teegavarapu, S., Summers, J., (2006), “Similarity Metrics for Engineering Design”, ASME-DETC2006, DAC-99678, Philadelphia, PA, September 10-13.
  110. Mocko, G., Rosen, D., Mistree, F., (2006), “A Critical Analysis of Description Logic for Engineering Information Management”, 26th ASME International Conference on Computers and Information in Engineering, Philadelphia, Pennsylvania USA. Paper No. DETC2006-99473.
  111. Anandan, S., Summers, J., (2006), “Similarity Metrics Applied to Graph Based Design Model Authoring”, CAD’06, Phuket, Thailand, June 19-23. EXEMPLAR
  112. Snider, M., Summers, J., (2006), “Database Support for Reverse Engineering Product Teardown and Redesign”, CAD’06, Phuket, Thailand, June 19-23.
  113. Tiwari, S., Fadel, G.M., and Gantovnik, V., “A Survey of various Encoding Schemes and Associated Placement Algorithms Applied to Packing and Layout Problems”, Proceedings of the ASME IDETC DAC, DETC2006-99271, Philadelphia, PA, Sept 2006
  114. Dong, H., Fadel, G.M., Blouin, V., “Vehicle Component Layout with Shape Morphing, An Initial Study”, Proceedings of the ASME IDETC DAC, DETC2006-99272, Philadelphia, PA, Sept 2006.
  115. Gantovnik, V., Fadel, G.M., and Gurdal, Z., “An Improved Genetic Algorithm for the Optimization of Composite Structures”, Proceedings of the ASME IDETC, DETC2006-99423, Philadelphia, PA, 2006
  116. Blouin, V.Y., Fadel. G.M., Summers. J.D., Fenyes, P. A. “Three dimensional Packing by a Heuristic-based Sequential Genetic Algorithm”, Proceedings of the AIAA MAO conference, Portsmouth, VA, Sept. 2006
  117. Gantovnik, V.B., Tiwari, S., Fadel, G.M., Yi, M. “Multi-objective Vehicle Layout optimization”, Proceedings of the AIAA MAO conference, Portsmouth, VA, Sept. 2006
  118. Fadel, G.M., and Wiecek. M.M., “Integration through Optimization: An Interdisciplinary Graduate-level Course in Engineering Design and Mathematical Optimization”, proceedings of the AIAA MAO conference, Portsmouth, VA, Sept. 2006
  119. Tiwari, S., Fadel, G.M., Gantovnik, V., “A Survey of Various Encoding Schemes and Associated Placement Algorithms Applied to Packing and Layout Problems”, Proceedings of the ASME IDETC-DAC conference ASME-99271, Philadelphia, PA, Sept 2006
  120. Motyka, M., Maier, J.R.A., Fadel, G.M., “Representing the Complexity of Engineering Systems: A Multidisciplinary Perceptual Approach”, ICCS6, Boston, MA, 2006
  121. Galli, J., Schwager, M. and Fadel, G.M., “Optimal Slicing for Ultrasonic Consolidation” Proceedings of the TMCE 06, Lljubljana, Slovania, April 2006
  122. Kunz, A., Fadel, G., Taiber, J., Schichtel, M., “Towards Collaboration in Engineering of Tomorrow – Building Highly Interactive Distributed Collaboration Platforms”, Paper 2006-01-0363 SAE Transactions, presented at the SAE congress 2006
  123. Weber, J., and Fadel, G., “Opportunities and Hindrances to Collaborative Automotive Development” Paper 2006-01-1469 SAE Transactions, presented at the SAE congress, 2006.

[edit] 2001 to 2005

  1. Motyka, M., Fadel, G.M., Meier, M., Dierssen, S., “ Complexity representation for Design” ICED 05 conference, Melbourne, Australia, August 2005
  2. Blouin, V., Oschwald, M., Hu, Y. and Fadel, G.M., “Design of functionally graded structures for enhanced thermal behavior”, Proceedings of the ASME DETC-DAC conference, Long Beach, DETC2005-85290, CA, Sept. 2005
  3. Dong, H., Fadel, G.M., Blouin, V., “Packing optimization by enhanced rubber band analogy” Proceedings of the ASME DETC-DAC conference DETC2005-85502, Long Beach, CA, Sept. 2005
  4. Yi, M. and Fadel, G.M., “A Packing Genetic Algorithm for Configuration Design” Presented at the ASME DAC conference, Long Beach, Paper DETC2005-85479, CA, Sept. 2005
  5. Maier, J., and Fadel, G.M., “A case study contrasting German Systematic Engineering Design with Affordance Based Design” Proceedings of the ASME DTM conference DETC2005-84954, Long Beach, CA, Sept. 2005
  6. Hu, Y., Blouin, V. and Fadel, G.M., “ Design for manufacturing of 3D heterogeneous objects with processing time considerations”, Proceedings of the ASME DFM conference DETC2005-85474, Long Beach, CA, Sept. 2005 – Winner of Best paper award ASME DETC DFM conference
  7. Summers, J., (2005), “Reasoning in Engineering Design”, ASME-DETC2005, DTM-85334, Long Beach, CA.
  8. Pehlivan, S., Dempsey, C., Summers, J., (2005), “Information Modeling for Fixture Design”, ASME-DETC2005, DFM-85417, Long Beach, CA.
  9. Powers, L., Summers, J., (2005), “Roles and Observations of a Graduate Design Coach”, ASME-DETC2005, DAC-85136, Long Beach, CA.
  10. Summers, J., (2005), “Expressiveness of the Design Exemplar”, ASME-DETC2005, CIE-85135, Long Beach, CA. EXEMPLAR
  11. Summers, J., (2005), “Comparative Study of CAD Interrogation Capabilities: Commercial CAD vs. Design Exemplar”, ASME-DETC2005, CIE-85112, Long Beach, CA. EXEMPLAR
  12. Bajaj, M., Kim, I., Mocko, G., Peak, R., Udoyen, N., Wilson, M., Greene, D., Raines, B., Srinivasan, V., 2005, “Diagnosing Engineering Information Interoperability: Recognizing the value of standards-based PLM - Part 1”, 25th ASME International Conference on Computers and Information in Engineering, Long Beach, CA, Paper No. DETC2005/CIE-84020.
  13. Kim, I., Bajaj, M., Udoyen, N., Mocko G., Wilson, M., Peak, R., (2005), “Metrics for Degree-of-Openness of Engineering Information: Recognizing the value of standards-based PLM - Part 2”, 25th ASME International Conference on Computers and Information in Engineering, Long Beach, California. Paper No. DETC2005/CIE-84791. (Robert E. Fulton EIM Best Paper Award for 2005).
  14. Blouin, V. Y., Lassiter J. B., Wiecek, M. M., Fadel, G. M.,(2005), "Augmented Lagrangian Coordination for Decomposed Design Problems," 6th World Congress of Structural and Multidisciplinary Optimization, Rio de Janeiro, 30 May - 03 June 2005, Brazil.
  15. Fadel, G. M., Haque, I., Blouin, V. Y., Wiecek, M. M.,(2005), "Multi-criteria Multi-scenario Approaches in the Design of Vehicles", 6th World Congress of Structural and Multidisciplinary Optimization, Rio de Janeiro, 30 May - 03 June 2005, Brazil.
  16. Ostergaard, K.L., Summers, J.D. and Fadel, G.M.,(2004), “ Resistance Based Modeling of Collaborative Design” Paper DETC2004/DAC-57076, presented at the ASME DAC conference, Salt Lake City, October 2004.
  17. Yi, M., Blouin, V.Y., and Fadel G.M., (2004), “Packaging of Medium Tactical Vehicle Equipped with Hybrid Propulsion System and Fuel Cell APU”, Proceedings of the 30th Design Automation Conference, ASME/DETC, Sept. 28-Oct. 3, 2004, Salt Lake City, UT.
  18. Blouin, V.Y., Summers, J.D., Fadel, G.M. and Gu, J, (2004), “Intrinsic Analysis of Decomposition and Coordination Strategies for Complex design problems”, MAO conference, Albany, NY, Aug 2004.
  19. Maier, J.R.A. and Fadel, G.M., (2003), “ On the Complexity of the Design-Artifact-User System ,” Proceedings of ICED 03, Stockholm, Sweden. August 19-21, 2003. Paper no. 1366.
  20. Maier, J.R.A. and Fadel, G.M., (2003), “Affordance-based methods for Design” DETC2003/DTM48673, presented at the ASME DTM conference, Chicago, September 2003.
  21. Neil, J., Blouin, V., Fadel, G.M., (2002), “GA-Based Multi-Material Structural Optimization Using Stepwise Mesh Refinement”, Paper AIAA-2002-5461, presented at the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 2002.
  22. Klar, T., Baladi, M., Fadel, G.M., and Almer, M., (2002), “An interactive Virtual Environment for 3D model Assembly with Video immersion” Paper DETC2002/DAC-34151 presented at the ASME DAC conference, Montreal, September 2002.
  23. Scarlat, G., Haque, I. and Fadel, G.M., (2002), “A modified Monte-Carlo approach to simulation-based vehicle parameter design with multiple performance objectives and multiple scenarios” SAE conference, March 2002.
  24. Fadel, G.M., Konda, S., Blouin, V. and Wiecek, M., (2002), “Epsilon-Optimality in Bi-Criteria Optimization” Paper AIAA-2002-1233, presented at the 43rd AIAA/ASME/ASCE/AHS/ASC SDM conference, 2002.
  25. Lindemann, U., Fuchs, D. K., Anderl, R., Fadel, G., Jokele, B., Kleiner, S. and Greenstein, J., (2002),"Sensitization to the Distributed Development Process", In: Horvath (Hrsg.): 4th TMCE, Wuhan (P. R. China), 22.-26. April 2002. Huazhong University of Science & Technology Press, pp. 601-612.
  26. Maier, J.R.A. and Fadel, G.M., (2001), “Strategic Decisions in the early stages of Product Family Design” ASME DETC, Pittsburgh, PA, Paper No DETC01/DFM-21200, September 2001.
  27. Fadel, G.M., and Maier, J.R.A., (2001), “Affordance, the Fundamental Concept in Engineering Design” ASME DETC, Pittsburgh, PA, Paper No DETC01/DTM-21700, September 2001.
  28. Fadel, G.M., Sinha, A. and McKee, T., (2001), ”Packing Optimization using a Rubberband Analogy” ASME DETC, Pittsburgh, PA, Paper No DETC01/DAC-21051, September 2001.
  29. Morvan, S., Fadel, G.M., Keicher, D., Love, J., (2001), “Manufacturing of a Heterogeneous Flywheel on a LENS Apparatus” Solid Freeform Fabrication Conference, Austin TX. Published in conference proceedings, August 2001.
  30. Holzer, F. and Fadel, G.M., (2001), “Design of a 3-degrees of Freedom Platform for the Stereolithography Apparatus” European Rapid Prototyping conference, Paris, France. Published in conference proceedings. June 2001.
  31. Maier, J. R.A. and Fadel, G.M., (2002), “Comparing Function and Affordance as bases for Design” Paper DETC2002/DTM-34129, presented at the ASME DTM conference, Montreal, September 2002.
  32. Maier, J.R.A and Fadel, G.M., (2004), “Understanding the complexity of Design “ Proceedings of the Fifth International Conference on Complex Systems, May 2004, Boston, Ma. Editors A. Minai and Y. Bar-Yam.
  33. Yi, M., Blouin, V.Y. and Fadel, G.M., (2003), “Multi-objective configuration Optimization with vehicle dynamics applied to Midsize truck design” DETC2003/DAC48735 presented at the ASME DAC conference, Chicago, September 2003.
  34. Blouin, V.Y., Yi, M., Zhou, P., and Fadel, G.M.,(2004), “An Assessment of Configuration Design Methodologies” Paper presented at the ISSMO MAO conference Albany, NY Aug 2004.
  35. Hunt, B.J., Wiecek, M. and Fadel, G.M.,(2004), “Matrices as Preference Modeling Tools in Bi-Criteria Engineering Design”, Paper presented at the ISSMO MAO conference Albany, NY Aug 2004.
  36. Pehlivan, S., Summers, J., Huang, Y., (2004), “Representation Requirements for Supporting Intelligent Fixture Design Retrieval and Reuse”, SPIE Optics East, Conference 5605, Philadelphia, PA, October 2004.
  37. Divekar, A., Summers, J., (2004), “Logical Connectives for a CAD Query Language: Algorithms and Verification”, ASME DETC-2004, CIE-2004-076, Salt Lake City, UT. (nominated for best paper) EXEMPLAR
  38. Summers, J., Shah, J., (2004), “Exemplar Networks: Extensions of the Design Exemplar”, ASME DETC-2004, CIE-2004-075, Salt Lake City, UT. EXEMPLAR
  39. Wetmore, W., Summers, J., (2004), “Influence of Group Cohesion and Information Sharing on Effectiveness of Design Review”, ASME DETC-2004, DAC-57509, Salt Lake City, UT.
  40. Ostergaard, K., Summers, J., Fadel, G., (2004), “Resistance Based Modeling of Collaborative Design”, ASME DETC-2004, DAC-57076, Salt Lake City, UT.
  41. Summers, J., Shah, J., (2004), “Representation in Engineering Design: A Framework for Classification”, ASME DETC-2004, DTM-57514, Salt Lake City, UT.
  42. Summers, J., McLaren, B., Aha, D., (2004), “Towards Applying Case-Based Reasoning to Composable Behavior Modeling”, Behavior Representation in Modeling and Simulation (BRIMS04), SISO, Arlington, VA, May 17-20, 04-BRIMS-017.
  43. Mocko, G., Panchal, J., Fernández, M., Peak, R., Mistree, F., (2004), " Towards Reusable Knowledge-Based Idealizations for Rapid Design and Analysis," in 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 19-22 April 2004, Palm Springs, CA, Paper No. AIAA-2004-2009.
  44. Mocko, G., Malak, R., Paredis, C., Peak, R., (2004), “A Knowledge Repository for Behavioral Models in Engineering Design”, 24th International Conference on Computers and Information in Engineering, Salt Lake City, Utah. ASME Paper No. DETC2004-57746.
  45. Wetmore, W., Summers, J., (2003), “Group Decision Making: Friend or Foe?”, IEEE International Engineering Management Conference (IEMC-2003), Albany, NY.
  46. Ostergaard, K., Wetmore, W., Summers, J., (2003), “A Methodology for the Study of the Effects of Communication Method on Design Review Effectiveness”, ASME DETC-2003, DAC-48742, Chicago, IL.
  47. Ostergaard, K., Summers, J., (2003), “A Taxonomy for Collaborative Design”, ASME DETC-2003, DAC-48781, Chicago, IL.
  48. Divekar, A., Summers, J., (2003), “The Design Exemplar: A Foundation for a CAD Query Language”, ASME DETC-2003, CIE-48228, Chicago, IL. EXEMPLAR
  49. Summers, J., Shah, J., (2003), “Developing Measures of Complexity for Engineering Design”, ASME DETC-2003, DTM-48633, Chicago, IL. EXEMPLAR
  50. Divekar, A., Summers, J., (2003), “Investigation of the Design Exemplar as a CAD Query Language”, International Conference on Engineering Design, ICED03-1349, Sweden, 2003. EXEMPLAR
  51. Ostergaard, K., Summers, J., (2003), “A Taxonomic Classification for Collaborative Design”, International Conference on Engineering Design, ICED03-1109, Sweden, 2003.
  52. Zeng, S., Kim, E., Mocko, G., Xiao, A., Peak R., Mistree F., (2003), “Systematic Method for Information Modeling,” 23rd International Conference on Computers and Information in Engineering, Chicago, IL, Paper No. DETC2003/CIE-48241.
  53. Summers, J., Shah, J., (2002), “Empirical Studies for Evaluation and Investigation of a New Knowledge Representation Structure in Design Automation”, ASME DETC-2002, CIE-34488, September 29 – October 2, Montreal, Canada. EXEMPLAR
  54. Summers, J., Lacroix, Z., Shah, J., (2002), “Case-Based Design Facilitated by the Design Exemplar”, Seventh International Conference on Artificial Intelligence in Design ‘02, ed. J. Gero, Kluwer Academic Press, Netherlands, pp. 453-76, ISBN 1-4020-0716-7. EXEMPLAR
  55. Peak, R., Wilson, M., Kim, I., Udoyen, N., Bajaj, M., Mocko, G., Liutkus, G., Klein, L., Dickerson, M., 2002, "Creating Gap-Filling Applications Using STEP Express, XML, and SVG-based Smart Figures - An Avionics Example", 2002 NASA-ESA Workshop on Aerospace Product Data Exchange ESA/ESTEC, Noordwijk (ZH), The Netherlands.
  56. Mocko, G., Paasch, R., 2002, “Incorporating Uncertainty in Diagnostic Analysis of Mechanical Systems,” 14th International

Conference on Design Theory and Methodology, Montreal, Canada. ASME Paper No. DETC2002/DTM-34017.

  1. Summers, J., Vargas-Hernandez, N., Zhao, Z., Shah, J., Lacroix, Z., (2001), “Comparative Study of Representation Structures for Modeling Function and Behavior of Mechanical Devices”, ASME DETC-2001, CIE-21243, Pittsburgh, PA. EXEMPLAR
  2. McKoy, F., Vargas-Hernandez, N., Summers, J., Shah, J., (2001), “Experimental Evaluation of Engineering Design Representations for Idea Generation”, ASME DETC-2001, DTM- 21685, Pittsburgh, PA.
  3. Summers, J., Lacroix, Z., Shah, J., (2001), “Collaborative Mechanical Engineering Design – Representation and Decision Issues”, Le Travail Humain, “Modeling Cooperative Activities in Design”, No. 8, Presses Universitaires de France, Paris, France. EXEMPLAR
  4. Venkatamaram, S., Shah, J., Summers, J., (2001), “An Investigation of Integration of Design by Features and Feature Recognition”, Feature Modeling and Advanced Design for the Life Cycle Systems, IFIP, Valenciennes, France. EXEMPLAR

[edit] 1990 to 2000

  1. Schuller, J., Haque, I., and Fadel, G.M., (2000), “Methods for simulation-based optimization of vehicle handling behavior”, Bound Volume, Proceedings of the IMECE, November 2000, Orlando, FL.
  2. Lindemann, U., Anderl, R., Gierhardt, H. and Fadel, G.M., (2000), “24 hr Design and Development – An Engine Design Project”. In: Scrivener, S. A. R.; Ball, L. J.; Woodcock, A.: Collaborative Design, Chapter B. Springer, New York, September 2000.
  3. Gierhardt, H., Lindemann, U., Anderl, R., Fadel, G., Fuchs, D.-K., Gaul, H.-D., Ott, T., (2000), “24h-Entwicklung - Ein Grundlagenprojekt in der Antriebsentwicklung”. In: Entwicklung im Karosseriebau, Hamburg, May 2000. Düsseldorf: VDI 2000, pp. 283-299. (VDI -Berichte 1543)
  4. Gierhardt, H.; Lindemann, U.; Anderl, R.; Fadel, G., (2000), "24hr Design and Development - An Engine Design Project”. In: Scrivener, S. (Eds.): Collaborative Design. CoDesign 2000, Coventry (UK), Sept 2000. London: Springer 2000, pp. 193-201.
  5. Bettig, B., Shah, J., Summers, J., (2000), “Domain Independent Characterization of Parametric and Geometric Problems in Embodiment Design”, ASME DETC-2000, DAC-14259, Baltimore, MD. EXEMPLAR
  6. Summers, J., Maxwell, D., Camp, C., Butler, A., (2000), “Features as an Abstraction for Designer Convenience in the Design of Complex Products”, ASME DETC-2000, CIE-14642, Baltimore, MD.
  7. Summers, J., Shah, J., (2000), “Leadership Style Selection Rules for Agent Architecture in Engineering Design”, Knowledge Intensive CAD, IFIP 5.2, KIC-4, Parma, Italy, KIC-16.
  8. Bettig, B., Shah, J., Summers, J., (2000), “Domain Independent Knowledge Representation of Parametric and Geometric Problems in Embodiment Design”, Knowledge Intensive CAD, IFIP 5.2, KIC-4, Parma, Italy, KIC-17. EXEMPLAR
  9. Summers, J., Butler, A., Kuo, E., (1999), “Development of a Feature Based Design System Using Virtual Reality”, ASME Design Engineering Technical Conference, Las Vegas, NV, DETC99/CIE-9034.
  10. Koenig, O., and Fadel, G.M., (1999), “Applications of Genetic Algorithms in the design of multimaterial structures Manufactured in Rapid Prototyping”, Solid Freeform Fabrication Conference, Austin TX, 1999. Published in conference proceedings, August 1999.
  11. Morvan, S., and Fadel, G.M., (1999), “Heterogeneous Solids: Possible Representation Schemes” Solid Freeform Fabrication Conference, Austin, TX. Published in conference proceedings, August 1999.
  12. Tyvaert, I., and Fadel, G.M., (1999), “A Methodology to create STL files from Data Point Clouds Generated with a Coordinate Measurement Machine”, Solid Freeform Fabrication Conference, Austin, TX. Published in conference proceedings, August 1999.
  13. Pickens, J., Fadel, G.M., Ganti, R., (1999), “NURBS based controller for Rapid Prototyping applications” Solid Freeform Fabrication Conference, Austin, TX. Published in conference proceedings, August 1999.
  14. Grignon, P., Fadel, G.M., (1999), “Multi-Objective Optimization by Iterative Genetic Algorithms” ASME DETC, Las Vegas, NV, Paper No DETC-99/DAC-8576, September 1999.
  15. Grignon P.M., and Fadel, G.M., (1999), “Configuration Design Optimization Method “ ASME DETC, Las Vegas, NV, Paper No DETC-99/DAC-8575, September 1999.
  16. Adams, N. and Fadel, G. M., (1998), ”Constraint Reordering For Multi-Objective Configuration Design” ASME Design Technical Conferences, Design Automation Conference, Atlanta, GA, September 1998.
  17. Li, Y., Fadel G. M. and Wiecek, M., (1998), ”Approximating Pareto Curves Using the Hyper-Ellipse” Paper presented at the First virtual ISSMO conference on Approximation for Optimization. Also presented at the AIAA/NASA/USAF/ISSMO conference on Multidisciplinary Design and Analysis Conference, St. Louis, MI, September 1998.
  18. Fadel, G.M., and Ganti, R., (1998), ”Parametric Based Controller For Rapid Prototyping Applications” Presented at the 1998 Solid Freeform Fabrication Conference, Austin, TX, August 1998.
  19. Wrana, J., Fadel, G. M. and Dooley, L., (1998), ”Fabricating Parts by Stereolithography using a rotational degree of freedom”, European Rapid Prototyping Conference, July 1998, Aachen, Germany.
  20. Grignon, P., Fadel, G.M., (1997), "Quality Criteria for Multi-objective optimization solutions obtained with a Genetic Algorithm”, Paper presented at the 38Th AIAA/ASME/ASCE/AHS/ASC SDM conference, Orlando, FL, April 1997.
  21. Kirschman, C.F. and Fadel, G.M., (1997), “Customer Metrics for the Selection of Generic Forms at the Conceptual Stage of Design” Paper presented at the ASME Design Technical Conferences, Design Theory and Methodology Conference, Sacramento, Ca, August 1997. Published in Conference Proceedings.
  22. Sandurkar, S., Chen, W. and Fadel, G.M., (1997), “GAPRUS, Three-Dimensional Pipe Routing Using Genetic Algorithms and Tessellated Objects” Paper presented at the ASME Design Technical Conferences, Design Automation Conference, Sacramento, Ca, August 1997. Published in Conference Proceedings
  23. Kirschman, J., Kirschman, C., Fadel, G.M., and Greenstein, J. , (1997), “The Clemson Intelligent Design Environment for Stereolithography - CIDES 2.0”. Solid Freeform Fabrication Conference, Austin TX, Published in Conference Proceedings, August 1997.
  24. Fadel, G.M., Bridgwood, M, Figliola, R.S., Greenstein, J., Kostreva, M., Nowaczyk, R., Stevenson, D.E., (1996), “Undergraduate MDA Curriculum at Clemson University” AIAA-96-4066-CP, pp 813-818, Paper presented at the NASA/AIAA/ISSMO Multidisciplinary Design and Optimization Conference, Seattle, WA, September 1996.
  25. Grignon, P., Wodziak, J., Fadel, G.M. , (1996), “Bi-Objective optimization of components packing using a genetic algorithm”, AIAA-96-4022-CP, pp. 352-362, Paper presented at the NASA/AIAA/ISSMO Multidisciplinary Design and Optimization Conference, Seattle, WA, September 1996.
  26. Kirschman, C, Fadel, G.M. and Jara-Almonte, C., (1996), “A Function Based decomposition in Mechanical Design” Design Theory and Methodology Conference, ASME Design Technical Conferences, Irvine, CA, Published in Conference proceedings, modified and forwarded to ASME Transactions of Design, August 1996.
  27. Morvan, S.M. and Fadel, G.M., (1996), “IVECS, An Interactive Virtual Environment for the Correction of .STL files”. 96-DETC/DFM-1305, Design for Manufacturing Conference, ASME Design Technical Conferences, Irvine, CA, Published in Conference proceedings, August 1996.
  28. Morvan, S.M., Fadel, G.M., (1996), “A VR environment for virtual prototyping and editing of STL files”, Solid Freeform Fabrication Conference, Austin TX, Published in Conference Proceedings, August 1996.
  29. Tata, K., Fadel, G.M., (1996), “Feature Extraction from Tessellated and Sliced Data in Layered Manufacturing”, Solid Freeform Fabrication Conference, Austin TX, Published in Conference Proceedings, August 1996.
  30. Challa, V., Fadel, G.M., (1995), “ Design Data Decomposition” Paper presented at the ASME Annual Congress, San Francisco, Published in Conference Proceedings, November 1995.
  31. Tatineni, S., Fadel, G.M., (1996), “ Coupling Through Move-limits in Multi-Disciplinary Optimization”, Accepted for presentation at the AIAA/ASME/SDM conference, April 1996, Salt Lake City, UT. Withdrawn and published in Structural Optimization Journal.
  32. Fadel, G.M. and Kirschman, C., (1995), “Accuracy Issues in CAD to RP Translations”, Invited paper to the first Internet conference on Rapid Prototyping, Forwarded to Rapid Prototyping Journal, October 1995.
  33. Fadel, G.M., Crane, D., Dooley, L. and Geist, R., (1995), “ Support Structure Visualization in A Virtual Environment” Presented at the sixth International Rapid Prototyping Conference, Dayton, OH, June 1995, published in the conference proceedings.
  34. Grignon, P., and Fadel, G.M., (1994), “Fuzzy Move-limit Evaluation in Structural Optimization”, Presented at the AIAA/NASA/USAF/ISSMO fifth Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, September 1994.
  35. Frank, D., Fadel, G. M., (1994), “Preferred Direction of Build for Rapid Prototyping Processes”, Paper presented at the fifth International Rapid Prototyping Conference, Dayton OH, June 1994, published in the conference proceedings.
  36. Vuyyuru, P., Kirschman, C. F., Fadel, G. M.,Bagchi, A. and Jara-Almonte, C. C., (1994), “A Nurbs based approach for Rapid Product Realization”, Paper presented at the fifth International Rapid Prototyping Conference, Dayton OH, June 1994, published in the conference proceedings.
  37. Ganesan, M., Fadel, G. M., (1994), “Hollowing Rapid Prototyping Parts Using Offsetting Techniques”, Paper presented at the Fifth International Rapid Prototyping Conference, Dayton OH, June 1994, published in the conference proceedings.
  38. Wodziak, J. R., Fadel, G. M. and Kirschman, C. F., (1994), “A Genetic Algorithm for Optimizing multiple part placement to reduce build time”, Paper presented at the Fifth International Rapid Prototyping Conference, Dayton OH, June 1994, published in the conference proceedings.
  39. Hyams, D., Fadel, G. M., (1994), “ Comparison of Various Move Limits Strategies for Structural Optimization” Paper presented at the AIAA/ASME/SDM 35th Conference, Hilton Head, SC, April 1994. Published in the conference proceedings.
  40. Fadel, G. M. and Cimtalay, S., (1993), “Evaluation of Move-Limits Using the Two Point Exponential Approximation in Structural Optimization”. Paper presented at the ASME WAM, November 1993. Published in the conference proceedings.
  41. Aziz, N. M., Fadel, G. M., (1993), “Computer Graphics Application to Truck Loading”, paper presented at the International Conference on Industrial Logistics, Rennes, France, July 1993.
  42. Leblanc, A. R., Fadel, G. M., (1991), “Design Data Storage and extraction using Objects”, Presented at the 1991 ASME WAM, Atlanta, GA, Engineering Database Program, CIE Division, December, 1991.
  43. Sareen, A. K., Fadel, G. M. and Shrage D. P., “Application of a Two Point Exponential Approximation Method in Optimizing Rotorcraft Airframe Structures”, Presented at the American Helicopter Society, Specialists meeting on Rotorcraft Structures, NASA Langley, October, 1991. Published in the conference proceedings.
  44. Fadel, G. M., Riley, M. F., Barthelemy, J. F. M., “Improved First Order Approximation Method for Structural Optimization”. Presented at the 1990 AIAA/ASME/SDM 31st Conference. Published in conference proceedings.
  45. Colton, J., Fadel, G. M., Fulton, R. F. et al., “Hierarchical Decomposition Design Methods for Automobiles,” Final Report for GM Corporation, Georgia Institute of Technology, September, 1990.

[edit] pre 1990

  1. Fadel, G. M. and Jeter, S. M., “Improved Higher Order Interpolation Methods for Convergence Finding in Modular Simulation”. Presented at the 1989 ASME Computers in Engineering Conference. Published in conference proceedings.
  2. Fadel, G. M. and Jeter, S. M., “The HyperEllipse Convergence Method”, Paper presented at the 1989 ASME Winter Annual Meeting. Published in ASME WAM conference proceedings AES-Vol. 6 Simulation of Thermal Energy Systems, December 1989.
  3. Fadel G. M. and Jeter S. M., “The Parallel Approach to the Simulation of Thermal Systems,” paper presented at the ASME International Computers in Engineering Conference, July 1988. Published in conference proceedings.
  4. Fadel, G. M. and Jeter, S. M., “Bracketing and Convergence in Thermal Systems Modeling”. Paper presented at the ASME WAM 1988. Selected by the AESD TC for archival publication in CIME. Published in ASME WAM transactions AES- Vol. 5, Analysis of Time-Dependent Thermal Systems, December 1988.
  5. Jeter, S. M., Wepfer, W. J., Fadel, G. M., Cowden, N. E. and Dymek, A. A., “Analysis and Simulation of Variable Speed Heat Pumps”, ASEE Conference, 1986. Published in conference proceedings.
  6. Jeter, S. M., Wepfer, W. J., Fadel, G. M., Cowden, N. E. and Dymek, A. A., “Variable Speed Drive Heat Pump Performance,” ASME Winter Annual Meeting, 1986. ASME WAM Transactions.
  7. Fadel, G. M., Rueda, J., “Use of Interactive Graphic Techniques in Building Peak Load and Energy Use Analysis”. Paper No. 2827, ASHRAE Transactions, 1984.
  8. Kellow, M., Jarrar, D., Fadel, G.M., “Design Optimization for a Solar Air Conditioning System”. Proceedings of ENERGEX ’84, The Global Energy Forum, pp. 255-260, Pergamon Press, 1984.
  9. Debs, A. S., Lokmanhekim, M., Fadel, G. M., “Energy Conservation in Kuwaity Buildings, A Case Study,” Second Arab Energy Conference, Doha, Qatar, March 1982.
  10. Debs, A.S., Fadel, G.M., Al-Tukhaim, K., Al-Madani, K., Aburshaid, H., Al-Hakim, T., ”Energy Conservation in the Kuwait Building Sector”. ENERGEX ’82, Vol. 1. pp. 618-624, Solar Energy Society of Canada, 1982.

[edit] Non-Refereed Conferences

  1. Czech, C., Guarneri, P. and Fadel. G.M., “Design of Auxetic Honeycombs as a Solution to the Material Topology Optimization Problem in Shear Loading, Accepted for presentation at the Society of Engineering Science 49th Annual technical Meeting, Oct 2012
  2. Jarrett, D., Gibert, J, and Fadel, G.M., “Stainless Steel Wire-Reinforced Metal Composites made by Ultrasonic Additive Manufacturing” accepted for presentation at the SFF Conference, Austin, TX, August 2012
  3. Tiwari, S., Koch, P., Fadel, G.M., and Deb, K.,“AMGA: An Archive-based Micro Genetic Algorithm for Multi-objective Optimization”, ICS Informs, Charleston, SC, Jan 2009
  4. Tiwari, S., Fadel, G.M., and Fenyes, P.,”A fast and efficient compact packing algorithm for automotive Luggage Packing”, ICS Informs, Charleston, SC, Jan 2009
  5. Mocko, G., Fadel, G., Summers, J., Maier, J.¸ Ezhilan, T., (2007), “A Systematic Method for Modeling and Analyzing Conceptual Design Information”, International Design Structure Matrix Conference, Munich, Germany, October 16-18, 2007.
  6. Maier, J., Troy, T., Johnston, P., Bobba, V., Summers, J., (2006), “A Case Study Documenting Specific Configurations and Information Exchanges in Designer-Artifact-User Complex Systems”, International Conference on Complex Systems 2006, Paper No. 183, June 25-30, Boston, MA.
  7. Blouin, V., Fadel, Summers, J., Fenyes, P., (2006), “Three-Dimensional Packing by Heuristic-Based Sequential Genetic Algorithm”, 11th AIAA/ISSMO Multidiciplinary Analysis and Optimization Conference, AIAA-2006-6906, Portsmouth, VA, Sep. 6-8, 2006.
  8. Ohland, M., Summers, J., (2005), “Teaching Design Using Multiple Hierarchical Engineering Education Models”, Harvey Mudd Design V, Claremont, CA.
  9. Blouin, V., Fadel, G., Wiecek, M., Summers, J., Dong, H., Miao, Y., Faulkenberg, S., (2005), “Packaging Optimization”, Automotive Research Center 2005 Conference, Detroit, MI.
  10. Hu, Y., Blouin, V. and Fadel, G.M., “Incorporating Manufacturability constraints into the Design Process of Heterogeneous Objects” SPIE conference, Oct 2004
  11. Blouin, V., Summers, J., Fadel, G., Gu, J., (2004), “Intrinsic Analysis of Decomposition and Coordination Strategies for Complex Design Problems”, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA-2004-4466, Albany, NY, Aug 30–Sep 1, 2004.
  12. Summers, J., Wood, J., (2004), “Non-Traditional Integration of Creative Writing in Undergraduate Engineering Courses”, SEM X International Congress & Exposition, SEM-342, Costa Mesa, CA, June 7-10.
  13. Fadel, G.M., “Rapid Prototyping and Manufacturing- Accomplishments and Potentials” Invited keynote address at the TMCE conference, Lausanne, April 2004.
  14. Summers, J., Shah, J., (2002), “Unified Theory of Geometric and Topological Problems in Mechanical Design and Manufacturing: Progress Year 3”, NSF Conference, San Juan, Puerto Rico, DMI 9812977. EXEMPLAR
  15. Gierhardt, H.; Baumann, C.; Anderl, R.; Fadel, G.; Lindemann, U.; “24hr Design and Development – A Model of global Design Teams”, International Conference on Engineering Design (ICED), August 2001.
  16. Summers, J., (2001), “Applications of Exemplars in CBR and DFX”, Joint Workshop between NSF and KIST, Seoul, Korea. EXEMPLAR
  17. Summers, J., Shah, J., (2001), “Unified Theory of Geometric and Topological Problems in Mechanical Design and Manufacturing: Progress Year 2”, NSF Conference, Tampa, FL, DMI 9812977. EXEMPLAR
  18. Fadel, G., Lindemann, U., Anderl, R.; “Multi-National Around the Clock Collaborative Senior Design Project”, Invited paper, Honorable mention at the ASME Curriculum Innovations Award 2000.
  19. Summers, J., (2000), “Development of Leadership Style Selection Rules for Agent Architecture in Engineering Design”, ASME-DAC and NSF Graduate Essay Competition, ASME DETC00, Baltimore, MD.
  20. Bettig, B., Shah, J., Summers, J., (2000), “Unified Theory of Geometric and Topological Problems in Mechanical Design and Manufacturing: Progress Year 1”, NSF Conference, Vancouver, Canada, DMI 9812977. EXEMPLAR
  21. Kuo, E., Lanzagorta, M., Rosenberg, R., Julier, S., Summers, J., (1999), “VR Scientific Visualization in the GROTTO”, Proceedings of the IEEE Virtual Reality, IEEE Computer Society, Houston, TX.
  22. Morvan, S., Fadel, G.M., “Virtual Prototyping Using STL files” International Body Engineering Conference, IBEC 1996, Detroit, MI, Published in Conference proceedings, October 1996.
  23. Fadel, G.M., Crane, D., Dooley, L., Geist, R. “ A Link between Virtual and Physical Prototyping”, Presented at the Society of Manufacturing Engineers Annual Conference, Detroit, MI, May 1995, published in conference proceedings.

[edit] Technical reports

  1. Blouin, V., Wiecek, M., Fadel, G.M., Gardenghi, M., Wang, W., Myer, D., Sloop, B., and Lassiter, J., “Decomposition and coordination of Engineering Design Problems: Lagrangian and Bi-Criteria Approaches” NSF Interim report Grant #0621055, April 2009.
  2. Fadel, G.M., Tiwari, S., “Packsoft, Final Report to the GM corporation, 2007
  3. Fadel, G.M., Summers, J., Mocko, G., Maier, J., and Ezhilan, T., Final Report, Requirements cascading, BMW corp. 2007
  4. Summers, J., 2004, "Algorithm for Complexity Connectivity", Technical Report, Clemson Research in Engineering Design and Optimization Lab, Clemson University, Clemson, SC, CREDO/AID/complexity/04-01. (abstract)
  5. Berthod, B., 2003, "A New Approach to the Design Problem and a New Use of the Design Exemplar: The Dynamic Networking Approach", Technical Report, Clemson Research in Engineering Design and Optimization Lab, Clemson University, Clemson, SC, CREDO/AID/exemplar/03-01. (abstract)
  6. Gunturi, S., 2003, "Taxonomy of Issues in a Mobile Distributed CAD Environment", Technical Report, Clemson Research in Engineering Design and Optimization Lab, Clemson University, Clemson, SC, CREDO-TR-VR-2003-Gunturi (abstract).
  7. Danker, J., 2002, "Design Exemplars and Gear Design", Technical Report, Clemson Research in Engineering Design and Optimization Lab, Clemson University, Clemson, SC, CREDO/AID/exemplar/02-01. (abstract)
  8. Summers, J., February 2000, “Exemplar Representation and Networking”, Technical Report, Design Automation Laboratory, Arizona State University, ASU/DAL/exemplar/00-6.
  9. Summers, J., February 2000, “Survey of Embodiment Design”, Technical Report, Design Automation Laboratory, Arizona State University, ASU/DAL/exemplar/00-5.
  10. Kulkarni, S., Summers, J., Shah, J., December 1999, “Influence of Method Variables on the C-Sketch Method – An Experimental Study”, Technical Report, Design Automation Laboratory, Arizona State University, ASU/DAL/IG/99-9.
  11. Summers, J., Butler, A., September 1996, “A Feasibility Study: The Heating and Drying of Coal Particles Using Fluidized Bed Technology”, Technical Report, Capsule Pipeline Research Center, CPRC Report No. 96-2.
  12. Sen, C., Caldwell, B.W., Summers, J.D., & Mocko, G.M. (2008). "Evaluation of the Functional Basis using an Information Theoretic Approach". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Function/001(2008).
  13. Caldwell, B.W., Sen, C., Summers, J.D., & Mocko, G.M. (2008). "Investigation of Functional Basis Term Frequencies within the Design Repository". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Function/002(2008).
  14. Sen, C., Caldwell, B.W., Summers, J.D., & Mocko, G.M. (2009). "Topological Information Content and Expressiveness of Function Models in Mechanical Design". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Function/001(2009).
  15. Mathieson, J., Sen, C., Summers, J.D. (2009). "A Case Study in Information Generation Through the Design Process". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Process/001(2009).
  16. Thomas, J., Sen, C., Summers, J.D., and Mocko, G.M. (2009). "Investigation of Interpretability of Three Function Representations". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Function/002(2009).
  17. Sen, C., Ameri, F., Summers, J.D., (2009). "Entropic Method for Sequencing Discrete Design Decisions". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Process/002(2009).
  18. Price, Y.N., Rotenburg, T., Caldwell, B.W., Sen, C., Namouz, E., Richardson, J., Summers, J.D., and Mocko, G.M. (2009). "Automotive Lightweight Engineering: Laziness Identification Process". Technical Report, Automation in Design Group, Clemson University. Report Number: AiD/Lightweight/001(2009).
  19. Fadel, G.M., Chen, W., Geist, R., Jacobs, D., Malloy, B., McGregor, J., Pargas, R. and Stevenson, D.E., “Design and Evaluation Modules for a Collaborative Vehicle Design Framework” Final Report, Contract # DAAE07-97-C-X130, US Army Tank Automotive and Armaments Command. March 1999.
  20. Fadel, G.M., Figliola, R., Stevenson, D., Nowaczyk, R., Bridgwood, M., Greenstein, J., and Kostreva, M. “The Component Packing Problem, A vehicle for the Development of Multidisciplinary Design and Analysis Methods” Annual Report 1995, NASA.
  21. Shah, J. et al, “Research Opportunities in Engineering Design”, Report of the NSF Strategic Planning Workshop, Gold Canyon, AZ, November 1995.
  22. Fadel, G.M., “A methodology for Affordability in the Design Process”, Final Report for the Air Force Office of Scientific Research, Bollings CA, Contract # 94-10026 January 1995.
  23. Fadel, G.M., Figliola, R., Stevenson, D., Nowaczyk, R., Bridgwood, M., Greenstein, J., and Kostreva, M., “The Component Packing Problem, A vehicle for the Development of Multidisciplinary Design and Analysis Methods” Annual Report 1994, NASA.
  24. Fadel, G.M., “Affordability in the Design Process”, Final Report for the Air Force Office of Scientific Research, Bollings CA, covering the summer faculty research at Wright Patterson Air Force Base, Dayton, OH. August 1994.
  25. Fadel, G.M., Figliola, R., Stevenson, D., Nowaczyk, R., Bridgwood, M., Greenstein, J., and Kostreva, M. “The Component Packing Problem, A vehicle for the Development of Multidisciplinary Design and Analysis Methods” Final Report Part 1, NASA and proposal for Part 2, Multidisciplinary Analysis Fellowship Program, June 1994.
  26. Colton, J., Fadel, G. M., Fulton, R. F. et al., “Hierarchical Decomposition Design Methods for Automobiles,” Final Report for GM Corporation, Georgia Institute of Technology, June, 1992.
  27. Fadel, G. M., Gourisankar, V. and Hotz, K., “Planning and Organization of IRAD Activities in CALSTAR,” Final Report for Lockheed Aeronautical Systems Inc., Marietta GA, Georgia Institute of Technology, March, 1992.
  28. Fadel, G. M., “Two Point Exponential Approximation Method for Structural Optimization of Problems with Frequency Constraints,” Final Report for NASA. Contract No. NAG-1-1144, Georgia Institute of Technology, 1991.
  29. Colton, J., Fadel, G. M., Fulton, R. F. et al., “Hierarchical Decomposition Design Methods for Automobiles,” Final Report for GM Corporation, Georgia Institute of Technology, September, 1990.
  30. Fadel, G. M., Rueda, J. et al., “IDEEA, Interactive Data Entry for Engineering Applications, User Manual,” Final report, Kuwait Institute for Scientific Research, KISR, IBM Kuwait Scientific Center (KSC) 1984.
  31. Fadel, G. M., Rueda, J. et al., “IDEEA, Interactive Data Entry for Engineering Applications, Programmer Manual,” Final report, Kuwait Institute for Scientific Research, KISR, IBM Kuwait Scientific Center (KSC), 1984.
  32. Fadel, G. M. et al., “Study of the Economics and Properties of Thermal Insulation Materials of the Dow Chemical Company in the Kuwaity Environment” Final Report, Kuwait Institute for Scientific Research, KISR, 1983.
  33. Fadel, G. M. et al., “Study of the Economics and Properties of Thermal Insulation Materials of the Dow Chemical Company in the Spanish Environment” Final Report, Kuwait Institute for Scientific Research, KISR, 1983.
  34. Debs, A. S., Fadel, G. M., et al., “Energy Conservation Code-of-Practice for Kuwait”, Four Volumes, Ministry of Electricity and Water, Kuwait, Kuwait Institute for Scientific Research, KISR, 1983.
  35. Fadel, G. M. et al., “Performance Evaluation of Energy Conservation Measures of a National Housing Authority Building” Final Report, Kuwait Institute for Scientific Research, KISR, 1981.
  36. Fadel, G. M., and Debs, A. S., “Engineering Analysis and Design of a Water Desalination Process Using Solar Waste Heat” Final report to the Kuwait Institute of Scientific Research KISR, Decision Systems International, Atlanta, August 1979.
  37. Fadel, G. M., Williams, J. R., and Debs, A. S., “Solar Energy Technology Transfer and Commercialization Assessment for Kuwait” Final report to the Kuwait Institute of Scientific Research KISR, College of Engineering, Georgia Institute of Technology, Atlanta, March 1979.

[edit] Theses & Dissertations

[edit] 2013

[edit] 2012

[edit] 2011

[edit] 2010

[edit] 2009

  1. Hannah, R., 2009, "User Study of Information Extracted from Engineering Representations", MS Thesis, Clemson University, Clemson, SC. (J. Summers advisor)
  2. Osborn, J., 2009, "Survey of Concurrent Engineering Environments and the Application of Best Practices towards the Development of Multiple Industry, Multiple Domain Environment", MS Thesis, Clemson University, Clemson, SC. (J. Summers advisor)
  3. Teegavarapu, T., 2009, "Foundations of Design Method Development", PhD Dissertation, Clemson University, Clemson, SC. (J. Summers advisor) on-line
  4. Sen, C., 2009, "A Study in the Information Content, Consistency, and Expressive Power of Function Structures in Mechanical Design", MS Thesis, Clemson University, Clemson, SC. (J. Summers and G. Mocko co-advisors) on-line
  5. Stowe, D., 2009, "Investigating the Role of Prototyping in Mechanical Design Using Case Study Validation", MS Thesis, Clemson University, Clemson, SC. (J. Summers advisor) on-line
  6. Michaelraj, A., 2009, "Taxonomy of Physical Prototypes: Structure and Validation", MS Thesis, Clemson University, Clemson, SC. (J. Summers advisor) on-line

[edit] 2008

  1. Anandan, S., 2008, "Similarity Metrics Applied to Graph Based Design Model Authoring", PhD Dissertation, Clemson University, Clemson, SC. (J. Summers adviser) on-line EXEMPLAR
  2. Miller, W., 2008, "Three Design Tool Focused Case Studies of Mechanical Engineering Design Projects", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) on-line
  3. Kanda, A., 2008, "An Investigative Study Of Patents From An Engineering Design Perspective", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) on-line

[edit] 2007

  1. Srirangam, N., 2007, "A Case Study on the Use of Design Exemplar as a Search and Retrieval Tool", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) on-line
  2. Kayyar, M., 2007, "Development of a Design Enabler Tool for Frame Analysis for a Small Enterprise: A Case Study", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) [2]
  3. Smith, G., 2007, "Morphological Charts: A Systematic Exploration of Qualitative Design Space", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) [3]
  4. Johnston, P., 2007, "The Role of Computer Aided Engineering in Developing a Combined Trash and Recycling Truck: A Case Study", MS Thesis, Clemson University, Clemson, SC. (J. Summers advisor) [4]
  5. Chavali, S., 2007, "A Case Study Investigating Rule Based Design in an Industrial Setting", MS Thesis, Clemson University, Clemson, SC. (J. Summers and G. Mocko advisers) [5]
  6. Putti, S., 2007, "Dynamic Networking of Design Exemplars: Towards a Mechanical Design Visual Programming Language", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) on-line EXEMPLAR

[edit] 2006

  1. Pehlivan, S., 2006, "Representation for Integration of Computer Aided Fixture Design Systems", PhD Dissertation, Clemson University, Clemson, SC. (J. Summers adviser) library
  2. Snider, M., 2006, "Extended Toolset for Reverse Engineering to Support Lightweight Engineering", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) library

[edit] 2004

  1. Bayanker, S., 2004, "A comparative study of CAD input devices", MS Thesis, Clemson University, Clemson, SC. (J. Summers co-adviser) library
  2. Wetmore, W., 2004, "PRSM, Proper Review Selection Matrix", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) library
  3. Divekar, A., 2004, "The Design Exemplar: The Foundation for a CAD Query Language", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser) library EXEMPLAR

[edit] 2002

  1. Ostergaard, K., 2002, "Investigation of Resistance to Information Flow in the Collaborative Design Process", MS Thesis, Clemson University, Clemson, SC. (J. Summers adviser). library
Personal tools