Analytical Equipment

3D Scanning and Analysis

3d Scanning and analysisThe Breuckmann OptoTOP-HE Structured-light scanning technology is designed for surface scanning and 3D topography. It offers highly accurate measurements of surfaces, designed for documentation, study, analysis and reconstruction of an object or a site.


Photogrammetry

PhotogrammetryPhotogrammetry is the practice of determining geometric properties from photographic images. This technology is used in a variety of fields including; manufacturing, power, equipment design, engineering, construction, architecture, and archeology.


Compressed Fluid Technologies

High Temperature & Pressure ReactorsHigh Temperature & Pressure Reactors
Supercritical Fluids Technology – CO2
Subcritical Water Technology: Metal Desalination for Corrosion Mitigation


 Scanning Electron Microscope - EDS/WDS

Scanning Electron Microscope - EDS/WDSThe Hitachi S-3700N is designed for conventional and variable pressure microscopy with ultra large chamber. This unit allows observation of most samples in their natural state, or wet condition, without the need of metal coating. Equipped with an Oxford INCAx-act EDS, and an INCAWave 500i WDS which provide accurate qualitative and quantitative elemental microanalysis.


 Micro Raman

Bruker Optics SENTERRA dispersive Raman microscopeThis spectroscopic technique is suitable for organic and inorganic materials. The instrument is a Bruker Optics SENTERRA dispersive Raman microscope equipped with 532nm, 633nm and 785nm lasers, 20X and 50X bright field objectives, 10X, 20X, 50X long working distance and 60X water immersion objectives and computer controlled x,y,z mapping stage.


 Handheld XRF

Handheld Energy dispersive X-Ray Fluorescence Tracer III-SD The Handheld Energy dispersive X-Ray Fluorescence Tracer III-SD manufactured by Brucker AXS has a typical resolution of 145eV at 100Kcps. XRF is an analytical technique using the interactions of X-rays with a material to determine its elemental composition. It is suitable for solids, liquids and powders and is widely used for Non-Destructive elemental analysis (metal, glass, ceramics, building materials, etc).


Micro-FTIR

The Hyperion is a high performance infrared microscope with transmission and reflection capabilities.The Hyperion is a high performance infrared microscope with transmission and reflection capabilities. The HYPERION FT-IR microscope is equipped with Ge ATR and 15X objectives, visible and IR polarizers, fluorescence accessory as well as binocular and video viewing. It has a fully automated motorized stage. The Tensor 27 is an FTIR spectrometer that can rapidly identify, quantify and verify Routine samples equipped with Pike "MIRacle" single reflection diamond ATR accessory.

 


Ion Chromatography

Dionex ICS-90 integrated, single-channel, isocratic ion chromatography system can support the use of anion- and cation-exchange columnsThe Dionex ICS-90 integrated, single-channel, isocratic ion chromatography system can support the use of anion- and cation-exchange columns. Chromelon® SE software controls the system and stores data, allowing simultaneous data analysis. The system is also equipped with a Dionex AS40 Automated Sampler able to hold up 66 vials.

 


 Digital Radiography

Non-destructive X-ray evaluation. Portable Seifert-Eresco MF1 industrial X-Ray source (20-300kV)Non-destructive X-ray evaluation. Portable Seifert-Eresco MF1 industrial X-Ray source (20-300kV), which penetrates up to 3in of steel. Hand held Golden Engineering XRS-3 pulsed X-ray source. (maximum photon energy 270kVP). Portable, battery operated, highly collimated, penetrates up to 1in of steel