LPM2026 Schedule

Welcome Opening Remarks
Dr. Yasuhiro Okamoto, JLPS General Chair, Hiroshima University, Japan
Dr. Hai Xiao, LPM2026 Conference Organizing Chair, Clemson University
Dr. Anand Gramopadhye, Dean of the College of Engineering, Computing and Applied Sciences at Clemson University
Sam Konduros, President, Greenville City Economic Development Corporation

Lunch Break: Explore Downtown Greenville

Picosecond laser-enabled scalable interface engineering for protonic ceramic electrochemical cells (Contributed) 126
Tianyi Zhou, Clemson University

Effect of Substrate Temperature on Melt Spreading Behavior of Titanium Particles in Laser Powder Bed Fusion (Contributed) 159
Yuji Sato, The University of Osaka

Ultrafast industrial laser processing of glass for semiconductor and quantum technology applications (Contributed) 160
Richard Windley, Oxford Lasers Ltd.

The Continuum of Laser Machining R&D: Precision Micro-Scale Laser Processing Machine Customization (Contributed) 163
NaiEn Wu, Precision Laser Solutions Pte Ltd

Ultrafast Laser Processing at Corning Incorporated: Innovations, and Opportunities (Invited) 80
Craig Ungaro, Corning Incorporated

Direct femtosecond laser figuring of freeform optics (Contributed) 65
M. Akif Qadeer, Rochester Institute of Technology

Slicing of N-type 4H-SiC Wafers Using MHz Burst-Mode Femtosecond Laser (Contributed) 14
Chung-Wei Cheng, National Yang Ming Chiao Tung University

Femtosecond-laser direct figuring and polishing of fused silica optics (Contributed) 66
Cyril Otieno, Rochester Institute of Technology

Micro- and Nano-scale Additive Manufacturing by Laser Nanoparticle Printing (Invited) 94
Heng Pan, Texas A&M University

Integrated Additive Manufacturing and Laser Processing of Protonic Ceramic Electrochemical Cells for Energy Conversion and Storage (Invited) 120
Joshua Tong, Clemson University

Laser Powder Bed Fusion of Copper Using a “Donut” shaped infrared laser beam (Invited) 140
Amelie VEILLERE, ICMCB-CNRS

Regimes and mechanisms of laser ablation: Validation of atomistic modeling by time-resolved optical and X-ray probing (Invited) 105
Leonid Zhigilei, University of Virginia

Neural network modeling of morphological changes in laser ablation with programmable GHz bursts (Contributed) 93
Shuntaro Tani, RIKEN

Multimodal online diagnostics and machine learning for ultrafast laser thinning of silicon (Contributed) 44
Eric Mottay, h-nu

Simulation and optimisation of a high peak power Tm:YLF amplifier (Contributed) 92

Souryadeep Saha, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)

Ultrafast laser structuring and modification of glasses (Invited) 108
S.K. Sundaram, Inamori School of Engineering, The New York State College of Ceramics

Overview of the state-of-the-art 50 fs micromachining of transparent materials (Contributed) 59
Kilian Fritsch, n2-Photonics GmbH

Challenges and opportunities in glass processing with MHz/GHz burst mode femtosecond laser (Contributed) 63
Deividas Andriukaitis, Ekspla

Ablation of transparent materials using 515 nm and 80 fs pulses (Contributed) 56
Kilian Fritsch, n2-Photonics GmbH

Toward Scalable Two-Photon Laser Manufacturing of Glass Micro-Optics (Invited) 31
Rongguang Liang, University of Arizona

Advances in Two-Photon Polymerization for Industrial Microoptics Manufacturing (Contributed) 91
Georg Winkler, UpNano GmbH

Two-photon polymerization of 3D structures for testing new protocols in cell biology (Contributed) 38
Alexandra Bran, National Institute for Laser, Plasma and Radiation Physics

A  Novel Thermal–Mechanical–Metallurgical Modeling Framework for Hybrid In-Situ Rolled Additive Manufacturing (Contributed) 155
Shunyu Liu, Clemson University 

Influence of Pulse Duration in Resonance Enhanced Nanosecond Laser Ultrasonics Using a Hollow Cylinder (Contributed) 81
Ruan Li, Clemson University

Three-Dimensional Coherent anti-Stokes Raman Scattering (CARS) Imaging of Fuel Capsules used for Laser-direct-drive Inertial Confinement Fusion (Contributed) 77
Xi Huang, University of Nebraska-Lincoln

Laser-induced Acoustic Signal Generation for Non-destructive Structural Health Evaluation (Contributed) 136
Tanuj Gupta, Clemson University

Women in Photonics and Laser Manufacturing Luncheon Session
Join us for a Women in Photonics and Laser Manufacturing networking luncheon! All are welcome, RSVP required via 'Special Events' during registration. 

Ultrafast laser direct writing of integrated frequency-converted waveguide laser (Invited) 162
Jie Qiao, Rochester Institute of Technology

High-index polymer photonic wire interconnection toward scalable co-packaged optics (Contributed) 68
Lixin XIANG, Institute of Science Tokyo

Femtosecond laser inscription of waveguide Bragg gratings for monolithic lasers (Contributed) 113
Derek Oliwa, Rochester Institute of Technology

Ultrafast Laser-Based Fabrication of 3D Glass Devices: From Microfluidic Chips to In-Fiber Photonic Structures (Invited) 154
Jiyeon Choi, Korea institute of Machinery and Materials

Measuring residual stresses in laser-based additively manufactured components via neutron diffraction (Invited) 104
Dunji Yu, Oak Ridge National Laboratory

Reflecting ‘Nanoness’ in Nano-Printing: Using Free Radical Coupling to Improve Both Resolution and Throughput in Two-Photon Polymerization (Contributed) 78
Peizi Li, University of Nebraska-Lincoln

Reactive laser additive manufacturing of multi-leveled carbon monoliths (Contributed) 21
Shuichiro Hayashi, Princeton University

In-situ Architecturing of 3D Microstructural Composites via Laser Additive Manufacturing for Synergistic Property Enhancement (Contributed) 15
Kaihao Zhang, The Hong Kong University of Science and Technology (Guangzhou)

Transparent welding of dielectric materials: road to large-scale, high-strength and low residual shear stress assemblies (Invited) 46
John Lopez, University of Bordeaux - CNRS - CEA

Optimizing scanning geometry for ultrafast laser welding of ultralow expansion glass (Contributed) 101
Thomas Kilmer, Corning Research and Development Corporation

Improved weld strength in non-optical-contact glass welding using ultrashort laser bursts (Contributed) 50
Edgaras Markauskas, Center for Physical Sciences and Technology (FTMC)

Wavelength‑dependent process stability in laser micro welding of copper with high thickness ratios (Contributed) 85
Leonard Plutz, Institute of Photonic Technologies (LPT), Friedrich-Alexander Universität Erlangen-Nürnberg (FAU)

Optofluidic Integrated Microscopy Enabled by Femtosecond Laser Micromachining (Invited) 58
Petra Paie, Politecnico di Milano

Beyond conventional acoustic holography using laser direct writing (Contributed) 45
Jordi Torres-Durall, Department of Applied Physics, Universitat de Barcelona, Spain

Three-dimensional waveguide fabrication in PDMS using nanosecond laser–induced bubbles (Contributed) 48
Yastaka Hanada, Hirosaki university

Bottom-Up Microfabrication Utilizing Laser-Induced Microbubbles (Invited) 87
Sho Fujii, Yamagata University

Reactive laser powder bed fusion processing:  Controlling structure and chemistry in laser based Additive Manufacturing (Invited) 151
Craig Arnold, Princeton University

Particle Generation across Metals, Semiconductors, Ceramics, and Plastics via Femtosecond Laser Ablation in Liquid Environments (Contributed) 79
Haoyu Dong, University of Nebraska-Lincoln

External electric fields in bimodal laser powder bed fusion (Contributed) 148
Ankit Das, Princeton University

3D Printed Electrochemical Sensors with Femtosecond Laser Treatment for Cellphone-based Portable Detection (Invited) 128
Qiong Nian, Arizona State University

In-situ-investigation of drug–polymer segregation mechanisms during electrophotographic powder application for laser-based powder bed fusion via Raman spectroscopy (Contributed) 153
Vadim Medvedev, Bayerisches Laserzentrum

3D printing of functional structures by two photon deposition (Invited) 157
Gary Cheng, Purdue Unviersity

2µm wavelength nanosecond laser welding of silicon (Contributed) 49
Duncan P. Hand, Heriot-Watt University

Evaluating adhesive and ultra-short pulse laser techniques for optomechanical glass assemblies (Contributed) 60
Adrian Dzipalski, Heriot Watt University

Programmable ultrafast laser nanostructuring (Invited) 18
Razvan Stoian, Laboratoire Hubert Curien, UMR 5516, CNRS, Université Jean Monnet, Saint Etienne, France

Direct femtosecond laser fabrication of nanostructures toward anti-reflection coatings (Contributed) 112
Cedric Silva, Rochester Institute of Technology

Femtosecond laser-based surface texturing up to 300W with beam-shaping and beam-splitting with Multi Plane Light Conversion technology (Contributed) 106
Adeline Orieux, CAILABS

Non-Mechanical Laser Focusing Technique for High-Throughput 3D Microfabrication in Transparent Materials (Contributed) 35
Florin Jipa, National Institute for Laser, Plasma and Radiation Physics (INFLPR), Magurele - Bucharest, Romania

Femtosecond Laser Polishing of Copper/Diamond Composites (Invited) 114
Jean-François Silvain, ICMCB-CNRS

Role of surface wettability properties in the anti-icing efficiency of superhydrophobic surfaces (Contributed) 83
Eva Rodríguez Vidal, TEKNIKER

Direct Laser Induced Graphene Patterning on Metals with Tunable Surface Wettability for Thermal Management and Anti-Icing Applications (Contributed) 16
Kaihao Zhang, The Hong Kong University of Science and Technology (Guangzhou)

Experimental study of acoustic waves from picosecond laser-textured steel surfaces under nanosecond laser excitation (Contributed) 64
Isaac Akambole, Clemson University

Femtosecond Laser Surface Functionalization and Applications in Renewable Energy (Invited) 145
Chunlei GUO, University of Rochester

Ultrafast Laser-Induced Micro/Nanostructures on CoCrMo Alloys and Their Surface Properties (Contributed) 33
Po-Wei Chang, National Pingtung University of Science and Technology

Femtosecond laser texturing for functional glass surfaces (Contributed) 89
Bogusz Stepak, Fluence Technology

Influence of laser-induced surface topography and coverage on the delamination resistance of copper-EMC interfaces (Contributed) 86
Annette Brunner, Schaeffler Technologies AG

Laser-assisted building-integrated photovoltaic thin film solar module fabrication (Invited) 102
David Hwang, State University of New York at Stony Brook

Numerical and experimental investigation of beam diameter effects in picosecond laser volume micro-processing of Foturan glass (Contributed) 39
Laura Ionel, National Institute for Laser, Plasma and Radiation Physics (INFLPR), Magurele - Bucharest, Romania

MHz burst-mode ultrafast laser micromachining for ultrasmooth surfaces (Contributed) 17
Xiao Jia, University of Groningen

Pulsed Hard K_alpha X-ray sources for laser-assisted material analysis and engineering (Invited) 36
Olivier UTEZA, LP3 - CNRS - AMU

Direct observation of concentration gradients for control of laser-induced crystallization of organic molecules (Invited) 73
Yuka Tsuri, Nara Institute of Science and Technology

Ultrafast laser filamentation: overcoming challenges in remote plasma generation and spectroscopic signature detection (Invited) 141
Vassilia Zorba, Lawrence Berkeley National Lab & UC Berkeley

Rapid, non-melting laser sintering of Nickel Oxide-Yttria-Stabilized Zirconia/Yttria-Stabilized Zirconia for Solid Oxide Electrolysis Half-Cell Arrays (Contributed) 152
YUDI JIN, Clemson University

Femtosecond laser processing for GaN-based electronic devices (Contributed) 55
Paulius Gecys, Center for Physical Sciences and Technology (FTMC)

Tunable Wettability on PMMA Surfaces via Femtosecond Laser Uniform Scanning and Periodic Micropillars (Contributed) 98
Shubha Majumder, Clemson University

Atmosphere-resolved process mapping of surface structuring on porous nickel fiber materials via ultrafast pulsed laser (Contributed) 26
Haujin Salih, Ruhr Universität Bochum

Leveraging THz bursts for femtosecond laser micromachining (Invited) 142
Caterina Gaudiuso, CNR - Institute for Photonics and Nanotechnologies

Laser Micro-fabrication on Aerospace Applications (Invited) 144
Alonza Brown, GE Aerospace Research

Influence of burst-mode parameters when processing different materials with femtosecond lasers (Contributed) 61
Kamilė Kasačiūnait, Light Conversion

Improved productivity and quality in drilling insulating film using GHz-burst DUV picosecond laser (Contributed) 13
Alexandre Rondepierre, Mitsubishi Electric Corporation

Crackless femtosecond laser drilling of transparent materials by suppressing stress wave magnitude (Contributed) 158
Yusuke Ito, University of Tokyo

Study Of Thermal Accumulation During Ultrafast Laser Ablation (Contributed) 100
Shubha Majumder, Clemson University

Ultrafast 10.6 µm CO₂ Laser Sintering of SiC–Oxide Ceramic Systems for Environmental Barrier Coating Applications (Contributed) 150
Gideon Irogbele, Clemson University

Electric fields in laser induced forward transfer for modulating jet dynamics and enhanced resolution (Contributed) 147
Ankit Das, Princeton University

Scalable Surface Engineering with Self-Organized Laser Functionalization and Applications (Invited) 134
Craig Zuhlke, University of Nebraska-Lincoln

Bridging micro/nanostructures and mass production: scalable laser-engineered antimicrobial surfaces (Contributed) 20
Petr Hauschwitz, Hilase Centre, Institute of Physics, Academy of Sciences of the Czech Republic

Control of cellular growth via surface topographies formed by different GHz burst modes of femtosecond laser (Contributed) 24
Shota Kawabata, RIKEN Center for Advanced Photonics, Tokyo University of Agriculture and Technology

Laser precision fabrication application to medical device manufacturing (Invited) 139
Duncan Hand, Heriot-Watt University

Digital glass forming for optics, photonics, and structures (Invited) 149
Edward Kinzel, University of Notre Dame

3D CYTOP microfluidic chips with an ultra-thin channel structure fabricated by two-photon polymerization-molding process (Contributed) 25
Sota Matsumoto, RIKEN RAP

Passive stabilization of femtosecond laser beam thanks to Multi Plane Light Conversion technology for hollow core fiber injection at high power (Contributed) 107
Adeline Orieux, CAILABS

Holographic laser processing using hologram design based on the estimation of fabricated structures (Contributed) 111
Satoshi Hasegawa, Center for Optical Research and Education (CORE), Utsunomiya University

Beyond the lab: Targeted applications of high-power fiber-coupled USPL for next-generation aerospace platforms (Invited) 167
Adam Hicks, Air Force Research Laboratory

Novel Dual Fiber Bragg Gratings (DFBGs) Written in Highly Doped Erbium-Doped Single Mode (SM) Fibers for Applications in Fiber Sensors and Distributed Feedback Laser Sensors (Contributed) 165
Samuel Bingham, Clemson University

Femtosecond laser direct writing of metal-organic framework-5 (19)
Ryo Moriyama, Keio University

Investigation of laser debonding using 308 nm excimer laser for advanced semiconductor packaging (27)
Insung Choi, Korea Institute of Machinery and Materials

High-precision green laser welding of high-purity aluminum thin sheets (28)
Remy Bourdenet, CEA

Enhancing hot spot density of silver nanoparticles for surface-enhanced Raman scattering applications (34)
Hsuan-Kai Lin, National Pingtung University of Science and Technology

Nonlinear ionization of transparent dielectrics exposed to single-shot ultrashort laser excitation: Insights from calibrated experiment (37)
Olivier UTEZA, LP3 - CNRS - AMU

Parametric study of Vortex beam shaping coupled with Burst regimes for potential polishing applications (47)
John Lopez, University of Bordeaux - CNRS - CEA

Material-dependent plume absorption during short-pulse CO2 laser ablation of PI and PTFE revealed by pump–probe measurements (67)
Kazuyuki Uno, University of Yamanashi

Reinforcement Learning of Laser Scanning Paths for Uniform Thermal Distribution via the Selective Laser Thermoregulation Method (69)
Tomomasa Okubo, Department of Mechanical Engineering, School of Engineering, Tokyo University of Technology

Investigation of machining dynamics of Bessel TSL processing of sapphire (71)
Seitaro Kumo, Department of Mechanical Engineering, Graduate School of Engineering, University of Tokyo, Japan

Investigation of the Mechanism of Laser-Induced Phase Transitions in InSb by Converging Ring-Shaped Stress Wave (84)
Kyohei Ishizuka, -Department of Mechanical Engineering, School of Engineering, The University of Tokyo

Enhancing Bonding Performance of CFRP–Aluminum Joints via Femtosecond Laser Surface Treatment (110)
Libin Lu, Ningbo Institute of Technology, Beihang University

Femtosecond-laser engineered dual-scale stripe microstructures for regulating fibroblast responses on titanium mesh implants (115)
Jiaru Zhang, Ningbo University of Technology

Investigations of Bessel TSL drilling in various glass materials (123)
Io Hanaoka, Department of Mechanical Engineering, School of Engineering, The University of Tokyo, Japan

Closing Plenary Talk 1: Industrial UV Lasers – State-of-the-Art, Applications, Market, and Outlook 51
Norman Hodgson, Coherent, Inc., California, USA

Closing Plenary Talk 2: From Machining Waste to Functional Materials: Laser-Based Approaches toward Closed-Loop Manufacturing 146
Jiwang Yan, Keio University, Yokohama, Japan

Closing Plenary Talk 3: Femtosecond laser micromachining of transparent materials for advanced devices 40
Roberto Osellame, CNR - Institute for Photonics and Nanotechnologies, Milan, Italy